Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
General specifications | ||
---|---|---|
Type | Inclination sensor, 1-axis | |
Measuring range | 0 ... 360 ° | |
Absolute accuracy | ≤ ± 0.5 ° | |
Response delay | ≤ 20 ms | |
Resolution | ≤ 0.1 ° | |
Repeat accuracy | ≤ ± 0.1 ° | |
Temperature influence | ≤ 0.027 °/K | |
Functional safety related parameters | ||
MTTFd | 300 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED, green | |
Teach-in indicator | 2 LEDs yellow (switching status), flashing | |
Button | 2 push-buttons ( Switch points programming , Evaluation range programming ) | |
Switching state | 2 yellow LEDs: Switching status (each output) | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | ≤ 25 mA | |
Time delay before availability | ≤ 200 ms | |
Switching output | ||
Output type | 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected | |
Operating current | ≤ 100 mA | |
Voltage drop | ≤ 3 V | |
Analog output | ||
Output type | 1 current output 4 ... 20 mA | |
Load resistor | 0 ... 200 Ω at UB = 10 ... 18 V 0 ... 500 Ω at UB = 18 ... 30 V |
|
Compliance with standards and directives | ||
Standard conformity | ||
Shock and impact resistance | 100 g according to DIN EN 60068-2-27 | |
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
Approvals and certificates | ||
IECEx approval | IECEx INE 14.0029X | |
ATEX approval | INERIS 14 ATEX 0022X Device type: EJB4A.D.CP-INX360D-F99-I2E2 |
|
Marking | II 2 GD Ex db IIB+H2 T6 Gb, II 2 GD Ex tb IIIC T85 °C Db | |
E1 Type approval | 10R-04 | |
Ambient conditions | ||
Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
Storage temperature | -40 ... 60 °C (-40 ... 140 °F) | |
Mechanical specifications | ||
Connection type | Connection terminals, max. conductor cross-section 2.5 mm2 | |
Conductor cross section | 0.14 ... 2.5 mm2 | |
Cable gland | for cable diameter 3 ... 8.5 mm | |
Cover fixing | stainless steel socket cap head screws | |
Screws | M6 | |
Housing material | Seawater-resistant aluminum | |
Finish | epoxy coated RAL 7005 (grey) | |
Flamepath grease | Greasil MS4 or NEVER SEEZ Marine Grade | |
Degree of protection | IP66 | |
Mass | 9 kg | |
Dimensions | ||
Height | 175 mm | |
Width | 226 mm | |
Length | 303 mm | |
Factory settings | ||
Switching output 1 | -30 ° ... 30 ° | |
Switching output 2 | -30 ° ... 30 ° | |
Analog output | -45 ° ... 45 ° |
System | Classcode |
---|---|
ECLASS 13.0 | 27271101 |
ECLASS 12.0 | 27271101 |
ECLASS 11.0 | 27271101 |
ECLASS 10.0.1 | 27271101 |
ECLASS 9.0 | 27271190 |
ECLASS 8.0 | 27270790 |
ECLASS 5.1 | 27270790 |
ETIM 9.0 | EC011640 |
ETIM 8.0 | EC003965 |
ETIM 7.0 | EC002544 |
ETIM 6.0 | EC002544 |
ETIM 5.0 | EC002544 |
UNSPSC 12.1 | 41114624 |
Brief Instructions | Språk | Filtype | Filstørrelse |
---|---|---|---|
Instruction Manual EJB | ENG | 256 KB |
CAD | Språk | Filtype | Filstørrelse |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 3105 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 124 KB |
Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
---|---|---|---|---|
INERIS IECEx Certificate of Conformity | IECEx INE 14.0029X | ALL | LINK | --- |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4745 | ALL | 53 KB |