Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for
VAZ-SW-SUITE
| Produktbeskrivelse |
| Combined software for configuration, diagnostics, and programming, for masters and safety monitors (type KE4, K20, K30, K31) |
| General specifications |
| Description | VAZ-SW-ACT32: operating software for configuration, programming, AS-Interface diagnostics, and AS-Interface safety diagnostics
VAZ-SW-ASIMON: configuration of safety monitors, coupling of safety monitors, diagnostic information for further processing in higher-level control systems. Documentation and configuration. System diagnostics and troubleshooting.
VAZ-SW-DIAGNOSTIC: hardware diagnostics: serial numbers, software IDs, etc., device-specific parameters.
AS-Interface diagnostics: detection of short circuits to ground, double addresses, and interference voltage. Measurement of the AS-Interface voltage and currents. Error counters, access to error history in the master.
Safety diagnostics: safety status, display of test requirements and safety-related faults, instructions, and recommendations. |
| System requirements |
| Hardware requirements | 500 MB of hard disk space available
Min. 256 MB working memory |
| Operating system | from Windows 7 (32 and 64 bit) |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27242607 |
| ECLASS 12.0 | 27242607 |
| ECLASS 11.0 | 27242607 |
| ECLASS 10.0.1 | 27242607 |
| ECLASS 9.0 | 27242607 |
| ECLASS 8.0 | 27242607 |
| ECLASS 5.1 | 27242607 |
| ETIM 9.0 | EC001603 |
| ETIM 8.0 | EC001603 |
| ETIM 7.0 | EC001603 |
| ETIM 6.0 | EC001603 |
| ETIM 5.0 | EC001603 |
| UNSPSC 12.1 | 39121535 |
Details:
VAZ-SW-SUITE
Relaterte produkter:
VAZ-SW-SUITE
| Accessory of |
|
|
|
| Safety monitor, three 2-channel secure inputs, two secure outputsfa |
|
|
|
|
KE4 control cabinet module for rotary encoders
2 safe inputs und 2 safe outputsfa |
|
|
|
|
KE4 switch cabinet module for rotary encoder
Adapter for 2 rotary encoder to rotation speed monitor and control panelfa |
|
|
|
|
KE4 switch cabinet module
8 safety-related electronic outputs, each switchable with a standard output, 8 standard inputsfa |
|
| Accessories |
|
|
|
| Interface cable for connecting the K30/K31 Safety Monitor to a PCfa |
|
|
|
|
| USB Type A to Micro-USB connectorfa |
|
+47 3557 3800