Repeater KFD0-CS-Ex2.50P

2-channel isolated barrier
24 V DC supply (loop powered)
Current input/output 4 mA ... 20 mA
transmitter power supply
Accuracy 0.1 %
Reverse polarity protection
Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for KFD0-CS-Ex2.50P

General specifications
Signal type		Analog input/analog output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Systematic capability (SC)		SC 3
Supply
Rated voltage		5 ... 35 V DC , loop powered
Control circuit
Connection		terminals 12-, 11+; 8-, 10-, 9+
Voltage		5 ... 35 V DC
Current		4 ... 20 mA
Power dissipation		at 20 mA and U_in < 24.3 V: < 250 mW per channel at 20 mA and U_in > 24.3 V: < 500 mW per channel
Field circuit
Connection		terminals 1+, 2-; 4+, 5-
Voltage		for 5V < U_in < 24.3V: ≥ 0.9 x U_in - (0.37 x current in mA) - 1.0 for U_in > 24.3 V: ≥ 21 V - (0.36 x current in mA)
Short-circuit current		at U_in > 24.3 V : ≤ 65 mA
Transfer current		≤ 40 mA
Transfer characteristics
Accuracy		0.1 %
Deviation
	After calibration	≤ ± 20 µA; incl. calibration, linearity, hysteresis and load fluctuations at the field side up to a load of 1 kΩ at 20 °C (68 °F)
	Influence of ambient temperature	≤ ± 2 µA/K at U_in ≤ 20 V; ≤ ± 5 µA/K at U_in > 20 V
Rise time		≤ 5 ms at bounce from 4 ... 20 mA and U_in < 24 V
Galvanic isolation
Field circuit/control circuit		safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Indicators/settings
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 EN 61326-3-2:2008
Degree of protection		IEC 60529:2001
Protection against electrical shock		UL 61010-1:2012
Ambient conditions
Ambient temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 100 g
Dimensions		20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
	Height	107 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		BAS 98 ATEX 7343 X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Voltage	25.2 V
	Current	93 mA
	Power	585 mW
Control circuit
	Maximum safe voltage	250 V _eff (Attention! The rated voltage can be lower.)
Field circuit
	Maximum safe voltage	250 V _eff (Attention! The rated voltage can be lower.)
Certificate		FIDI 22 ATEX 0001 X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC 60079-7:2015+A1:2018
International approvals
FM approval
	Control drawing	116-0437
UL approval		E106378
	Control drawing	116-0438 (cULus)
IECEx approval
	IECEx certificate	IECEx BAS 05.0004X IECEx CML 19.0040X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210120
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD0-CS-Ex2.50P

Function

This isolated barrier is used for intrinsic safety applications.

The device can be used as a repeater or transmitter power supply for 2-wire transmitters.

This device is loop powered. No additional power supply has to be connected.

Use the technical data to verify that proper voltage is available to the field devices.

Informative Literature: KFD0-CS-Ex2.50P

Literature	Språk	Filtype	Filstørrelse
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD0-CS-Ex2.50P

Safety and Security Documentation	Språk	Filtype	Filstørrelse
Instruction manual	ENG	PDF	173 KB
Functional Safety Manual	ENG	PDF	1969 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD0-CS-Ex2.50P

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	1854 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	49 KB

Approvals: KFD0-CS-Ex2.50P

Certificates	Sertifikatnummer	Språk	Filtype	Filstørrelse
Australia Test Safe	ANZEx 17.3006X	ALL	PDF	6788 KB
Baseefa IECEx Certificate of Conformity	IECEx BAS 05.0004X	ALL	LINK	---
CML IECEx Certificate of Conformity	IECEx CML 19.0040X	ALL	LINK	---
China SITIIAS CCC Ex Certificate	2020322316001389 (Singapore)	ALL	PDF	1009 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
Europe Baseefa II (1) D II (1) G I (M1) ATEX	BAS 98 ATEX 7343X	ALL	PDF	2755 KB
Europe Fiditas ATEX Category 3	FIDI 22 ATEX 0001X	ALL	PDF	2254 KB
Korea KOSHA	19-AV4BO-0634X	ALL	PDF	375 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 RepRef E106378-20180529	ALL	PDF	354 KB
USA FM	FM 18 US 0116X	ALL	PDF	170 KB
Ukraine SERTIS Ex	SC 21.0646 X	ALL	PDF	12351 KB
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1)	CML 21UKEX2709X	ALL	PDF	140 KB
Control Drawings
Control drawing FM / Control drawing FM		ALL	PDF	46 KB
Control drawing CSA / Control drawing CSA		ALL	PDF	501 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0772G	ALL	PDF	89 KB
UKCA-Declaration of conformity / UKCA-Konformitätserklärung	DOC-5674	ALL	PDF	79 KB

Relaterte produkter: KFD0-CS-Ex2.50P

Matching System Components

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Snarveier

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.