Resistance Repeater KCD2-RR2-Ex1

1-channel isolated barrier
24 V DC supply (Power Rail)
Resistance and RTD input (Pt100, Pt500, Pt1000)
Resistance output
Accuracy 0.1 %
Line fault detection (LFD) for Pt100
Housing width 12.5 mm
Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for KCD2-RR2-Ex1

General specifications
Signal type		Analog input
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Systematic capability (SC)		SC 3
Supply
Connection		Power Rail or terminals 9+, 10-
Rated voltage		19 ... 30 V DC
Ripple		within the supply tolerance
Rated current		< 28 mA
Power consumption		0.35 W (24 V and 1 mA sense current), 0.85 W (30 V and 10 mA sense current)
Input
Connection side		field side
Connection		terminals 1, 2, 3, 4
Line fault detection		yes , at Pt100
Lead resistance		≤ 10 % of resistance value
Transmission range		0 ... 10 mA
Available voltage		7 V
Line fault detection		< 30 nA
Output
Connection side		control side
Connection		terminals 5-, 7-, 6+, 8+
Current		0 ... 10 mA
Available voltage		0 ... 4.2 V
Fault signal		field voltage < 150 mV or > 4 V, depending on lead disconnected
Reverse polarity protection		for I < 10 mA or U < 20 V
Transfer characteristics
Accuracy		0.1 %
Deviation		I_m ≥ 1 mA: ±0.1 % of R_m or ± 0.1 Ω (the larger value is applicable) I_m < 1 mA: accuracy reduces in proportion to I_m. e. g. I_m = 0.1 mA: ± 1 % of R_m or 1 Ω (the larger value is applicable).
	Influence of ambient temperature	I_m ≥ 1 mA, R_m ≥ 100 Ω: 0.01 %/K in the range -20 ... +70 °C (-4 ... 158 °F) I_m < 1 mA or R_m < 100 Ω: temperature stability reduces in proportion to I_m or R_m
Settling time		≤ 5 ms
Rise time/fall time		≤ 2 ms (10 ... 90%)
Galvanic isolation
Output/power supply		functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements		LED
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 EN IEC 61326-3-2:2018
Degree of protection		IEC 60529:2001
Protection against electrical shock		UL 61010-1:2012
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 100 g
Dimensions		12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
	Height	119 mm
	Width	12.5 mm
	Depth	114 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 10 ATEX 0061X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
	Voltage	9.5 V
	Current	39.22 mA
	Power	93 mW
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Output
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Certificate		BASEEFA 10 ATEX 0062X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
FM approval
	FM certificate	FM 19 CA 0039 X , FM 19 US 0067 X
	Control drawing	116-0457 (cFMus)
UL approval		E106378
	Control drawing	116-0332 (cULus)
IECEx approval
	IECEx certificate	IECEx BAS 10.0024X IECEx BAS 10.0025X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210129
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KCD2-RR2-Ex1

Function

This isolated barrier is used for intrinsic safety applications.

It transfers resistance values of RTDs or potentiometers from hazardous areas to safe areas.

A 2-, 3-, or 4-wire technique is available depending on the required accuracy.

The input card of the control system measures the same load as if it were connected directly to the resistance in a hazardous area.

Informative Literature: KCD2-RR2-Ex1

Literature	Språk	Filtype	Filstørrelse
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KCD2-RR2-Ex1

Safety and Security Documentation	Språk	Filtype	Filstørrelse
Instruction manual	ENG	PDF	172 KB
Functional Safety Manual	ENG	PDF	1412 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KCD2-RR2-Ex1

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	3085 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---

Approvals: KCD2-RR2-Ex1

Certificates	Sertifikatnummer	Språk	Filtype	Filstørrelse
Baseefa IECEx Certificate of Conformity	IECEx BAS 10.0024X	ALL	LINK	---
Baseefa Zone 2 IECEx Certificate of Conformity	IECEx BAS 10.0025X	ALL	LINK	---
Brasil TUV Rheinland Brazil	TÜV 14.1606 X (Singapore)	ALL	PDF	1157 KB
Canada FM	FM19CA0039X	ALL	PDF	321 KB
Canada, USA UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 - RepRef E106378-20100413	ALL	PDF	419 KB
China SITIIAS CCC Ex Certificate	2020322316001401 (Singapore)	ALL	PDF	1037 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
Europe Baseefa II (1) D I (M1) II (1) G	Baseefa 10 ATEX 0061X	ALL	PDF	3083 KB
Europe Baseefa II 3 G ATEX Category 3 G	Baseefa 10 ATEX 0062X	ALL	PDF	2465 KB
India PESO (India) CCOE	A/P/HQ/KA/104/5807 (P477252)	ALL	PDF	542 KB
Japan TIIS	TC22713X	ALL	PDF	1629 KB
Korea KOSHA	21-AV4BO-0069X	ALL	PDF	707 KB
Korea KOSHA	21-AV4BO-0068X	ALL	PDF	700 KB
South Africa MASC	MASC MS/17-0858X	ALL	PDF	721 KB
USA FM	FM19US0067X	ALL	PDF	165 KB
United Kingdom UKEX Category (1) G UK-Type Examination Certificate UKEX Category (M1) UKEX Category (1) D	CML 21UKEX21109X	ALL	PDF	147 KB
Worldwide TUV Rheinland Functional Safety Certificate	No.: 968/FSP 2013.00/20	ALL	PDF	617 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	150 KB
Control drawing FM / Control drawing FM		ALL	PDF	147 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0357J	ALL	PDF	109 KB
UKCA-Declaration of conformity / UKCA-Konformitätserklärung	DOC-7082	ALL	PDF	101 KB

Relaterte produkter: KCD2-RR2-Ex1

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	EBP 2- 5 Insertion Bridge
	2-pin, Fully insulated, For connectors with 5.0 mm or 5.08 mm pitchpa

	KC-ST-5GN Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces greenpa

	KC-ST-5BU Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Snarveier

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.