Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for
NDP-KE2-8E2-FP
| Produktbeskrivelse |
| Inductive transmitter system |
| Nominal ratings |
| Operating voltage | 24 V DC ± 10 % |
| Number of signal channels | 8 |
| Signal transfer direction | from secondary side to primary side |
| Reverse polarity protection | reverse polarity protected |
| Current consumption | max. 1000 mA |
| Functional safety related parameters |
| MTTFd | 245 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Switching state | 8 x LED, yellow |
| Transfer indicator | LED, green |
| Input |
| Number | 1 |
| Input type | Activation input
signal level: ≥ 15 V = active, ≤ 3 V inactive |
| Input current | ≤ 1 mA |
| Internal resistor | ≥ 15 kΩ |
| Output |
| Output type | 1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant |
| Voltage drop | ≤ 2.5 V |
| Load current | max. 50 mA |
| Response time | ≤ 200 ms ( static operation , the transmission heads stand opposite to each other ) |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 89/336/EEC | EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999 |
| Standard conformity | |
| Standards | EN IEC 60947-5-2 |
| Approvals and certificates |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Material | |
| Housing | PA 66-FR |
| Installation | DIN rail mounting |
| Mass | 106 g |
| General information |
| Note | Maximum cable length between WIS module and WIS transmitter must not exceed 5 m. |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274090 |
| ECLASS 12.0 | 27274090 |
| ECLASS 11.0 | 27270190 |
| ECLASS 10.0.1 | 27270190 |
| ECLASS 9.0 | 27270190 |
| ECLASS 8.0 | 27270190 |
| ECLASS 5.1 | 27270190 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details:
NDP-KE2-8E2-FP
Design / Simulation:
NDP-KE2-8E2-FP
Relaterte produkter:
NDP-KE2-8E2-FP
| Matching System Components |
|
|
|
| fa |
|
|
|
|
| fa |
|
|
|
|
| fa |
|
+47 3557 3800