AS-Interface safety module VAA-2E1A-G10-SAJ/EA2J-1M
- Connection of contact safety switches, e.g. EMERGENCY STOP button
- Applications up to PLe
- Modular safety solution
- Ultra-compact enclosure
- Degree of protection IP67
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for VAA-2E1A-G10-SAJ/EA2J-1M
| Produktbeskrivelse |
|---|
| G10 safety module 2 safety inputs and 1 standard electronic output |
| General specifications | ||
|---|---|---|
| Node type | Safety-Slave | |
| AS-Interface specification | V3.0 | |
| Required gateway specification | ≥ V2.1 | |
| UL File Number | E223772 "For use in NFPA 79 Applications only" | |
| Indicators/operating means | ||
| LED FLT | error display; LED red red: communication error or address is 0 |
|
| LED AS-i | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
|
| LED IN | switching state (input); 2 LED yellow | |
| LED OUT | Switching state (output); LED yellow | |
| Electrical specifications | ||
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface (PELV) |
|
| Rated operating current | ≤ 90 mA | |
| Protection class | III | |
| Surge protection | overvoltage category III | |
| Rated insulation voltage | 32 V | |
| Pulse withstand voltage | 0.8 kV | |
| Input | ||
| Number/Type | 2 safety-related inputs for mechanical contacts, crossed-circuit monitored: 2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or 1 2-channel contact: up to category 4/PL e to ISO 13849-1 |
|
| Supply | from AS-Interface | |
| Voltage | 20 ... 30 V DC pulsed | |
| Current | input current limited ≤ 15 mA, short-circuit protected |
|
| Output | ||
| Number/Type | 1 conventional electronic output, PNP | |
| Supply | from AS-Interface | |
| Voltage | (UASI - 7.0 V) ≤ UOUT ≤ UASI | |
| Current | 50 mA , short-circuit/overload protected | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007 | |
| Machinery Directive | ||
| Directive 2006/42/EC | EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 | |
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| Fieldbus standard | EN 62026-2:2013 | |
| Electrical safety | IEC 61140:2009 | |
| Emitted interference | EN 61000-6-4:2007 | |
| AS-Interface | EN 62026-2:2013 | |
| Noise immunity | IEC 62026-2:2013 EN 62061:2005 EN 61000-6-2:2005 | |
| Functional safety | EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 | |
| Programming instructions | ||
| Profile | S-7.B | |
| IO code | 7 | |
| ID code | B | |
| ID1 code | F | |
| ID2 code | 0 | |
| Data bits (function via AS-Interface) | ||
| D0 | ||
| D1 | ||
| D2 | ||
| D3 | ||
| Parameter bits (programmable via AS-i) | function | |
| P0 | communication monitoring P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition |
|
| P1 | not used | |
| P2 | not used | |
| P3 | not used | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Type 1 enclosure | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -25 ... 80 °C (-13 ... 176 °F) | |
| Relative humidity | < 95 % | |
| Altitude | ≤ 2000 m above MSL | |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
|
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles | |
| Pollution degree | 3 | |
| Mechanical specifications | ||
| Degree of protection | IP67 This protection class is achieved by using the AS-Interface flat cable VAZ-FK-S-YE |
|
| Connection | AS-Interface: AS-Interface flat cable Inputs/outputs: open conductor ends |
|
| Material | ||
| Contacts | open conductor ends with connector sleeves | |
| Housing | PBT | |
| Cable | PUR | |
| Mounting screw | Stainless steel 1.4305 / AISI 303 | |
| Cable | ||
| Sheath diameter | ∅4.8 mm | |
| Bending radius | > 8 x cable diameter, fixed > 10 x cable diameter, moving not appropriate for conveyor chains | |
| Color | black | |
| Cores | 6 x 0.25 mm2 | |
| Length | 1 m | |
| Mass | 200 g | |
| Tightening torque, fastening screws | 1.65 Nm | |
| Dimensions | ||
| Height | 21.5 mm | |
| Width | 27.7 mm | |
| Length | 40.5 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272603 |
| ECLASS 12.0 | 27242604 |
| ECLASS 11.0 | 27242604 |
| ECLASS 10.0.1 | 27242604 |
| ECLASS 9.0 | 27242604 |
| ECLASS 8.0 | 27242604 |
| ECLASS 5.1 | 27242604 |
| ETIM 9.0 | EC001599 |
| ETIM 8.0 | EC001599 |
| ETIM 7.0 | EC001599 |
| ETIM 6.0 | EC001599 |
| ETIM 5.0 | EC001599 |
| UNSPSC 12.1 | 39121535 |
Details: VAA-2E1A-G10-SAJ/EA2J-1M
Function
The VAA-2E1A-G10-SAJ/EA2J- * is an AS-Interface safety module with 2 safety-related inputs and one conventional output. A two-channel mechanical switch or a single channel mechanical switch each can be connected to the two safety-related inputs. The output is a conventional electronic non-safety-related output, which can be loaded with 50 mA.
The module is suitable for remote connection of switches in very limited space. The onepiece housing provides a degree of protection of IP67.
The connection to the AS-Interface cable is achieved by means of insulation piercing method of the inserted flat cables. The inputs and the output are connected via open cable ends.
To display the current switching state, there is a LED for each channel mounted on top of the module. A LED indicating the AS-Interface communication and the adress 0 of the module is also available. If a communication error occurs, the outputs are switched off (only at P0 = 1).
The module can be used up to Category 4/PL e according to ISO 13849-1, SIL 3 according to EN 62061.
If two single-channel switches are connected, the module can be used up to Category 2/ PL c according to ISO 13849-1, SIL 1 according to EN 62061.
Informative Literature: VAA-2E1A-G10-SAJ/EA2J-1M
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Product Information - AS-Interface Less is better - G10 Safety - small, smart, and modular | ENG | 1290 KB |
Product Documentation: VAA-2E1A-G10-SAJ/EA2J-1M
| Brief Instructions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 593 KB | |
| Manuals | |||
| Manual VAA-2E*-G10-SAJ* | ENG | 1971 KB | |
Design / Simulation: VAA-2E1A-G10-SAJ/EA2J-1M
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 126 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VAA-2E1A-G10-SAJ/EA2J-1M
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Canada, USA | CoC 20171220-E223772 RptRef E223772-20130501 | ALL | 442 KB | |
| EU Ecolab Material Resistance | ECOLAB | ALL | 1096 KB | |
| Worldwide AS-International Association AS-Interface | 99901 | ALL | 118 KB | |
| Declaration of Conformity | ||||
| EU-Declaration of conformity | TDOC-2365FENG | ENG | 197 KB | |
Software: VAA-2E1A-G10-SAJ/EA2J-1M
| Software Tools | Frigivelsesinfo | Filtype | Filstørrelse |
|---|---|---|---|
| SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface Safety | ZIP | 622 KB |
Relaterte produkter: VAA-2E1A-G10-SAJ/EA2J-1M
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.