Base for read/write station U-P3-R4
- Degree of protection IP67
- Simple bus system with up to 30 units
- Serial interface RS 485, addressable
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for U-P3-R4
| Produktbeskrivelse |
|---|
| Base with addressable serial Interface RS 485 |
| Indicators/operating means | ||
|---|---|---|
| DIP switch | Setting the station address bus connection ON = active OFF = non-active |
|
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS , PELV | |
| Power consumption | max. 4 W with read/write head IPT*-FP | |
| Galvanic isolation | ||
| Operating voltage/interface | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
| Interface | ||
| Physical | RS-485, addressable , up to 30 bases , address 1 ... 30 | |
| Protocol | ASCII | |
| Transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s | |
| Cable length | ≤ 1200 m | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 according to EN 60529 with IPT*-FP | |
| Connection | screw terminals | |
| Interface cable | 2 conductor, acc. to RS-485 | |
| Supply | up to 3 x 1.5 mm2 | |
| Material | ||
| Housing | diecast aluminum | |
| Dimensions | ||
| Height | 30 mm | |
| Width | 80 mm | |
| Length | 91 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280492 |
| ECLASS 12.0 | 27280490 |
| ECLASS 11.0 | 27280490 |
| ECLASS 10.0.1 | 27280490 |
| ECLASS 9.0 | 27280490 |
| ECLASS 8.0 | 27280490 |
| ECLASS 5.1 | 27279212 |
| ETIM 9.0 | EC002997 |
| ETIM 8.0 | EC002997 |
| ETIM 7.0 | EC002997 |
| ETIM 6.0 | EC002997 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 31162301 |
Details: U-P3-R4
Function
The base is used in combination with an upper part, the IPT*-FP read/write station. An addressable RS 485 interface is available. It is thus possible to create a simple bus connection with up to 30 subscribers.
The address is set and the terminating resistor for the bus is connected via DIP switches.
The read/write station is connected to a higher-order control system via the serial interface and receives the commands for writing and/or reading code or data carriers via this interface.
Product Documentation: U-P3-R4
| Brief Instructions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 202 KB | |
| Manuals | |||
| Manual IPTx-FP with U-Px-R4 | ENG | 1158 KB | |
Design / Simulation: U-P3-R4
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 569 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: U-P3-R4
| Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3498B | ALL | 107 KB |
Relaterte produkter: U-P3-R4
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
Vi har utviklet en spesiell nettside som skal fungere som en kunnskapsbase for RFID-teknologi. Der finner du svar på vanlige spørsmål, og der kan du få informasjon om vanlige RFID-applikasjoner...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.