RFID evaluation unit IC-KP2-2HB21-2V1D
- LED status indicator of bus communication and read/write heads
- Max. 2 read/write heads can be connected
- Alternatively 1 read/write head and 1 trigger sensor can be connected
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for IC-KP2-2HB21-2V1D
| Produktbeskrivelse |
|---|
| IDENTControl Compact RFID evaluation unit with EtherCAT interface |
| General specifications | ||
|---|---|---|
| Number of read/write heads | max. 2 alternatively 1 read/write head and 1 trigger sensor |
|
| UL File Number | E87056 | |
| MTBF | 80 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LEDs 1, 2 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
|
| LEDs CH1, CH2 | green: read head detected red: Configuration error |
|
| LED PWR/ERR | green: power on red: Hardware fault |
|
| LED RUN | Off: init Flashing (green): pre-operational Single flash (green): safe-operational On (green): operational |
|
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 4 A incl. read/write heads | |
| Power consumption | 3.5 W Without read/write heads | |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Interface 1 | ||
| Interface type | EtherCAT (IN) | |
| Physical | Ethernet | |
| Protocol | EtherCAT® | |
| Transfer rate | 100 MBit/s | |
| Interface 2 | ||
| Interface type | EtherCAT (OUT) | |
| Physical | Ethernet | |
| Protocol | EtherCAT® | |
| Transfer rate | 100 MBit/s | |
| Interface 3 | ||
| Interface type | Diagnostic Interface | |
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 38.4 kBit/s | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61000-6-2 EN 61000-6-4 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
|
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
|
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M4 earthing screw Diagnostic RS 232: M8 connector EtherCAT: M12 connector, D-coded |
|
| Material | ||
| Housing | powder coated aluminum | |
| Installation | screw fixing | |
| Mass | approx. 300 g | |
| Dimensions | ||
| Height | 42 mm | |
| Width | 62 mm | |
| Length | 142 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IC-KP2-2HB21-2V1D
Function
The RFID identification system IDENTControl Compact from Pepperl+Fuchs offers a vast number of benefits compared to other systems, thanks to its innovative design. The control interfaces IDENTControl and IDENTControl Compact make up the core of the system.
With its integrated interfaces to all commercially available fieldbus systems such as PROFIBUS, PROFINET, Ethernet, EtherCAT, CC-Link, serial connections (RS 232 or RS 485) and numerous connection options for read/write heads available for frequency ranges LF, HF and UHF, the IDENTControl Compact control interface can be easily and flexibly adapted to your requirements.
LEDs on the front of the housing indicate bus communication, connected read/write heads and active read/write commands. Reliability of the application is further increased by using trigger sensors.
The system is equally suited for use in control cabinets and field use in IP67. The interface to the higher-level fieldbus is integrated in the housing, and all connections are designed such that they are pluggable. This enables simple installation and quick, problem-free replacement in case of device failure. The consistent EMC design, with metal housing, grounding and shielded wires, offers a high degree of reliability.
Informative Literature: IC-KP2-2HB21-2V1D
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB | |
| Application Report - Safe Assignment of Workpiece and Tool | ENG | 204 KB |
Product Documentation: IC-KP2-2HB21-2V1D
| Brief Instructions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Brief Instructions - IC-KP2-* | ENG | 2285 KB | |
| Manuals | |||
| Manual IC-KP2-2HB21-2V1D | ENG | 2033 KB | |
| Manual Read / Write Ranges and Passing Speeds RFID | ENG | 3640 KB | |
Design / Simulation: IC-KP2-2HB21-2V1D
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1833 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: IC-KP2-2HB21-2V1D
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Canada, USA UL | CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0 | ALL | 561 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0687E | ALL | 111 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6844 | ALL | 108 KB | |
Software: IC-KP2-2HB21-2V1D
Relaterte produkter: IC-KP2-2HB21-2V1D
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Vi har utviklet en spesiell nettside som skal fungere som en kunnskapsbase for RFID-teknologi. Der finner du svar på vanlige spørsmål, og der kan du få informasjon om vanlige RFID-applikasjoner...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.