Advanced Diagnostic Module HD2-DM-A.RO
- Diagnostics for fieldbus physical layer and power supply
- Plug-in Module for the FieldConnex Power Hub
- Plug and play - no engineering required
- For online monitoring
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Installation in Zone 2/Class I, Div. 2
- System state and fault indication via LEDs
- Alarm limits configurable via DIP switches
- Fault indication transmission by voltage free contact
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for HD2-DM-A.RO
| Produktbeskrivelse |
|---|
| Advanced diagnostic module with relay output for fieldbus power hub physical layer diagnostics |
| General specifications | ||
|---|---|---|
| Design / Mounting | Motherboard based | |
| Installation in hazardous area | Zone 2 / Div. 2 | |
| Supply | ||
| Rated voltage | 19.2 ... 35 V | |
| Rated current | 40 ... 25 mA | |
| Power dissipation | max. 1 W | |
| Fieldbus connection | ||
| Number of segments | 4 | |
| Fieldbus type | FOUNDATION Fieldbus/PROFIBUS PA | |
| Rated voltage | 9 ... 32 V | |
| Indicators/operating means | ||
| LED PRI PWR | green: on, primary bulk power supply connected | |
| LED SEC PWR | green: on, secondary bulk power supply connected | |
| LED Seg 1...4 | yellow: bus activity; yellow 2 Hz flashing: Maintenance required; red 2 Hz flashing: specification limit violated; red: hardware error | |
| Fault signal | VFC alarm 1 A, 50 V DC, normally closed | |
| DIP switch | fieldbus type , redundant supply , Signal level , Noise level , Jitter | |
| Galvanic isolation | ||
| Fieldbus segment/Fieldbus segment | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 95 % non-condensing | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Pollution degree | max. 2, according to IEC 60664 | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Core cross section | motherboard specific | |
| Housing material | Polycarbonate | |
| Degree of protection | IP20 | |
| Mass | approx. 100 g | |
| Dimensions | ||
| Height | 106 mm | |
| Width | 18 mm | |
| Depth | 128 mm | |
| Mounting | motherboard mounting | |
| Data for application in connection with hazardous areas | ||
| Certificate | TÜV 04 ATEX 2500 X | |
| Marking |  II 3 G Ex nA IIC T4 Gc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| FM approval | ||
| FM certificate | FM 19 US 0015 X and FM 19 CA 0011 X | |
| FM marking | AEx/Ex ec IIC T4 | |
| IECEx approval | ||
| IECEx certificate | IECEx TUN 13.0038X | |
| IECEx marking | Ex nA IIC T4 Gc | |
| Certificates and approvals | ||
| Marine approval | DNV A-14038 | |
| Patents | This product may be covered by the following patent: US7,698,103 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242692 |
| ECLASS 12.0 | 27242692 |
| ECLASS 11.0 | 27242692 |
| ECLASS 10.0.1 | 27242692 |
| ECLASS 9.0 | 27242692 |
| ECLASS 8.0 | 27242692 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC001604 |
| ETIM 8.0 | EC001604 |
| ETIM 7.0 | EC001604 |
| ETIM 6.0 | EC001604 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: HD2-DM-A.RO
Function
Designed as a plug-in module for the FieldConnex® Power Hub, the Advanced Diagnostic Module (ADM) with relay output is a monitoring tool for the physical layer of up to four fieldbus segments. Passive input circuits leave the physical layer untouched, avoiding alteration of the signal.
The ADM indicates unwanted conditions via voltage-free contact. It provides physical layer diagnostics "plug-and-play", without additional engineering. If desired, the values for maintenance and out-of-specification limit ranges are configurable via DIP switches. LED signals indicate that a limit has been exceeded. For commissioning and troubleshooting, a comprehensive diagnostic module such as the FieldConnex(R) mobile ADM (see DM-AM-KIT) is recommended.
Informative Literature: HD2-DM-A.RO
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB | |
| Application Report - Fieldbus Power Supply Compatible with Process Industry Applications | ENG | 229 KB |
Product Documentation: HD2-DM-A.RO
| Safety and Security Documentation | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction manual | ENG | 224 KB | |
| Manuals | |||
| Manual HD2-DM-A.RO Advanced Diagnostic Module Relais Output | ENG | 767 KB | |
Approvals: HD2-DM-A.RO
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Canada FM | FM 19 CA 0011X | ALL | 356 KB | |
| China SITIIAS CCC | 2020322310003510 (Singapore) | ALL | 1330 KB | |
| DNV Marine | TAA0000272 | ALL | 100 KB | |
| Europe TUV Nord ATEX Category 3 G | TÜV 04 ATEX 2500X | ALL | 1498 KB | |
| India PESO (India) CCOE | A/P/HQ/KA/104/5874 (P507650) | ALL | 101 KB | |
| USA FM | FM 19 US 0015X | ALL | 213 KB | |
| Worldwide TUV Nord Ex nA nC IECEx nA | IECEx TUN 13.0038X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0756C | ALL | 1040 KB | |
Relaterte produkter: HD2-DM-A.RO
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
| Matching System Components | ||||||
|
||||||
Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …
RSS Info Service for PANOS Updates
Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.
From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.