Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
General specifications | ||
---|---|---|
Design / Mounting | Cabinet installation | |
Supply | ||
Connection | Power Rail or terminals 59+, 60-, 58 FE | |
Rated voltage | 20 ... 35 V DC | |
Ripple | ≤ 10 % | |
Rated current | 190 mA ... 430 mA | |
Fieldbus connection | ||
PROFIBUS PA | ||
Connection | terminals 3, 18+; 2, 17- | |
Rated voltage | 12.6 ... 13.4 V | |
Rated current | max. 100 mA | |
Terminating impedance | 100 Ω , integrated | |
PROFIBUS DP | PROFIBUS with RS-485 transmission technology | |
Connection | Terminals 40 RxD/TxD-P, 41 RxD/TxD-N, 42 screen/FE, 55 DGND, 56 CNTR-P, 57 VP | |
Baud rate | 93.75 kBit/s | |
Terminating impedance | with rotary switch (S1) switchable: 1 = on; 0 = off | |
Galvanic isolation | ||
PROFIBUS DP/PROFIBUS PA | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V | |
PROFIBUS DP/Supply | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
PROFIBUS PA/Supply | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 | |
Standard conformity | ||
Galvanic isolation | EN 50178 | |
Electromagnetic compatibility | NE 21:2006 | |
Degree of protection | IEC 60529 | |
Fieldbus standard | EN 50170/2 | |
Climatic conditions | IEC 60721 | |
Ambient conditions | ||
Classification | 3K3 | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Relative humidity | < 75 % | |
Pollution degree | max. 2, according to IEC 60664 | |
Mechanical specifications | ||
Connection type | Terminals | |
Core cross section | up to 2.5 mm2 | |
Housing | 100 mm x 115 mm x 107 mm | |
Degree of protection | IP20 | |
Mass | 650 g | |
Mounting | DIN rail mounting | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | PTB 99 ATEX 2142 , for additional certificates see www.pepperl-fuchs.com | |
Marking | ![]() ![]() |
|
Supply | ||
Maximum safe voltage | 253 V AC / 125 V DC (Attention! Um is no rated voltage.) | |
PROFIBUS PA | ||
Voltage | 15 V | |
Current | 207.2 mA | |
Power | 1.93 W | |
Maximum safe voltage | 60 V | |
Certificate | PF 15 CERT 3527 X | |
Marking | ![]() |
|
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 | |
General information | ||
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27242610 |
ECLASS 12.0 | 27242610 |
ECLASS 11.0 | 27242610 |
ECLASS 10.0.1 | 27242610 |
ECLASS 9.0 | 27242610 |
ECLASS 8.0 | 27242610 |
ECLASS 5.1 | 27242610 |
ETIM 9.0 | EC001600 |
ETIM 8.0 | EC001600 |
ETIM 7.0 | EC001600 |
ETIM 6.0 | EC001600 |
ETIM 5.0 | EC001604 |
UNSPSC 12.1 | 39121008 |
The Segment Coupler 1 (SK1) is an all-in-one gateway and fieldbus power supply for connecting PROFIBUS PA to PROFIBUS DP transparently. The Segment Coupler powers a single PROFIBUS PA segment adapting current and voltage.
The output is rated intrinsically safe Ex ia IIC according to FISCO and Entity. The complete segment can be installed intrinsically safe.
Communication is transparent between DP and PA. The gateway of the Segment Coupler makes each PA device appear as if it was connected to DP: This relates to addressing, cyclic/acyclic data exchange, and the transfer rate. Segment design is clear and easy to understand without subnetworks. The gateway itself is confguration-free. All in all, these features significantly reduce engineering work.
SK1 supports any PROFIBUS DP master at a fixed transfer rate of 93.75 kbps.
Literature | Språk | Filtype | Filstørrelse |
---|---|---|---|
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Manuals | Språk | Filtype | Filstørrelse |
---|---|---|---|
Operating instructions Segment coupler | ENG | 1186 KB |
Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
---|---|---|---|---|
Europe PTB ATEX Category (1) G | PTB 99 ATEX 2142 | ALL | 1775 KB | |
Europe Pepperl+Fuchs ATEX Category 3 G | PF15CERT3527X | ALL | 244 KB | |
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) G UKEX Category (1) D | CML 23UKEX2204 | ALL | 148 KB | |
Control Drawings | ||||
Control drawing CSA / Control drawing CSA | ALL | 96 KB | ||
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2570B | ALL | 1046 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
RSS Info Service for PANOS Updates
Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.