Teknisk support Industrielle sensorer
Kundeservice, eksplosjonsbeskyttelse

Ind. angular measuring system PMI90DV-F130-I2E2-V15

PMI90DV-F130-I2E2-V15
  • Analog position indicator with end position monitoring
  • 2 configurable switching frames
  • Preset range of angle measurement 0 ... 90°
  • Extended analog signal range

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:


Datablad utdrag: Tekniske data for  PMI90DV-F130-I2E2-V15

General specifications
Measuring rangemax. 180°
min. 90°
Adjustment range180° , 2 switch frames programmable
Nominal ratings
Operating voltage18 ... 30 V DC
Reverse polarity protectionreverse polarity protected
Repeat accuracy± 0.25 °
Resolution0.2 °
Temperature drift0.02 ° / °C (-25 °C ... 70 °C)
No-load supply current≤ 45 mA
Functional safety related parameters
MTTFd234 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED yellow 1switching state, Switching output 1
LED yellow 2switching state, Switching output 2
LED PWR/ERRStatus display LED, green/red (Power on / missing actuator / keylock)
LED IActivator within measuring range
Switching output
Output type2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected , programmable
Operating current≤ 100 mA
Switching hysteresis1 °
Voltage drop≤ 3 V
Short-circuit protectionpulsing
Analog output
Output typecurrent output
3.8 ... 20.5 mA (RL < 400 Ω)
Linearity error± 1.5 ° , (with original actuator)
Transfer characteristics
Internal measurement cycle30 ms
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type5-pin, M12 x 1 connector
Degree of protectionIP67
Material
HousingPBT
Targetmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
Mass180 g
Dimensions
Height26.5 mm
Width76.5 mm
Length120 mm

Classifications

SystemClasscode
ECLASS 13.027274004
ECLASS 12.027274004
ECLASS 11.027270702
ECLASS 10.0.127270702
ECLASS 9.027270702
ECLASS 8.027270702
ECLASS 5.127270702
ETIM 9.0EC001852
ETIM 8.0EC001852
ETIM 7.0EC001852
ETIM 6.0EC001852
ETIM 5.0EC001852
UNSPSC 12.139121550

Details: PMI90DV-F130-I2E2-V15

Informative Literature: PMI90DV-F130-I2E2-V15

Velg språk:
LiteratureSpråkFiltypeFilstørrelse
Product Overview - Inductive Positioning SystemsENGPDF1289 KB

Design / Simulation: PMI90DV-F130-I2E2-V15

Velg språk:
CADSpråkFiltypeFilstørrelse
CAD 3-D / CAD 3-DALLSTP678 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ150 KB

Approvals: PMI90DV-F130-I2E2-V15

Velg språk:
CertificatesSertifikatnummerSpråkFiltypeFilstørrelse
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0686CALLPDF1217 KB
UK Declaration of Conformity (P+F)TDOC-5928_ENGENGPDF1284 KB

Relaterte produkter: PMI90DV-F130-I2E2-V15

Accessories

Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa

Female cordset single-ended M12 angled A-coded, 5-pin, PVC cable greyfa
Actuator for F130 series, Suitable for mounting on valve actuators for use in valve technologyfa