Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Produktbeskrivelse |
---|
Illuminated pushbutton module |
General specifications | ||
---|---|---|
Node type | Standard node | |
Indicators/operating means | ||
Button | 2 integrated, protected against accidental activation, keys can be individually labelled, labeling field on the module |
|
Electrical specifications | ||
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
Rated operating current | ≤ 55 mA (LEDs on) | |
Protection class | III | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 62026-2:2013 | |
Standard conformity | ||
Degree of protection | EN 60529:2000 | |
AS-Interface | EN 62026-2:2013 | |
Programming instructions | ||
Profile | S-3.F | |
IO code | 3 | |
ID code | F | |
Data bits (function via AS-Interface) | ||
D0 | ||
D1 | ||
D2 | ||
D3 | ||
Parameter bits (programmable via AS-i) | function | |
P0 | not used | |
P1 | not used | |
P2 | not used | |
P3 | not used | |
Ambient conditions | ||
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 according to EN 60529 | |
Connection | cable piercing method or terminal compartment flat cable or standard round cable |
System | Classcode |
---|---|
ECLASS 13.0 | 27371228 |
ECLASS 12.0 | 27371228 |
ECLASS 11.0 | 27371228 |
ECLASS 10.0.1 | 27371228 |
ECLASS 9.0 | 27371228 |
ECLASS 8.0 | 27371228 |
ECLASS 5.1 | 27371228 |
ETIM 9.0 | EC001028 |
ETIM 8.0 | EC001028 |
ETIM 7.0 | EC001028 |
ETIM 6.0 | EC001028 |
ETIM 5.0 | EC001028 |
UNSPSC 12.1 | 39121533 |
The illuminated pushbutton module VAA-LT2-G1 provides a link between the operating personnel and the AS-Interface master. The current status can be displayed by means of the LEDs integrated in the pushbuttons.
The illuminated pushbutton has IP67 protection and is therefore suitable particularly for use in the field.
Various bases are available for the module. Use the U-G1F base to connect to the ASInterface flat cable, and use the U-G1P base to connect to the round cable.
The output modules often have to be mounted in series with the illuminated pushbutton. The outputs of the output modules are supplied externally with power. If the power is supplied via a flat cable, the power supply lead has to be mounted in the base of the input module. The U-G1FF base should be used in this case. The VAA-LT2-G1 then uses the AS-Interface cable rather than the power cable.
CAD | Språk | Filtype | Filstørrelse |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 254 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2702C | ALL | 115 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Matching System Components | ||||||
|
||||||
|
||||||
Accessories | ||||||
|
||||||
|