Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Electrical specifications | ||
---|---|---|
Operating voltage | see data table | |
Rated impulse withstand voltage | 6 kV | |
Rated frequency | 50Hz | |
Short circuit current limitation | see data table | |
Operating current | see data table | |
Terminal capacity | see data table | |
Rated insulation voltage | 690 V | |
Function | switch disconnector | |
Color | black | |
Contact configuration | see data table | |
Switching configuration | 2 position with left OFF | |
Usage category | see data table | |
Number of poles | see data table | |
Auxiliary contacts | see data table | |
Auxiliary contacts usage category | see data table | |
Operator action | engage - engage | |
Lockable | in 'OFF' position | |
Labeling | 0 - I | |
Mechanical specifications | ||
Thread type | metric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1 | |
Enclosure range | EJB | |
Enclosure cover | fully detachable | |
Cover fixing | stainless steel socket cap head screws | |
Screws | see data table | |
Yield stress | min. 450 N/mm2 | |
Cover seal | none | |
Flamepath grease | Greasil MS4 or NEVER SEEZ Marine Grade | |
Degree of protection | IP66 | |
Cable entry | see data table | |
Defined entry area | face B | |
Material | ||
Enclosure | aluminum alloy | |
Finish | epoxy coated RAL 7005 (grey) | |
Mass | see data table | |
Dimensions | see data table values might differ slightly due to casting and manufacturing tolerances |
|
Tightening torque | ||
Nut torque at enclosure (SW1) | see datasheets of stopping plugs | |
Mounting | see data table | |
Grounding | M6 external grounding points | |
Ambient conditions | ||
Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) @ T6 | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | INERIS 14 ATEX 0022X | |
Marking | II 2 GD Ex d IIB+H2 T* Gb Ex tb IIIC Db |
|
International approvals | ||
IECEx approval | IECEx INE 14.0029X | |
UKCA approval | CML 21 UKEX 1425U | |
ECAS approval | 23-10-87483/E23-09-089610 | |
Conformity | ||
Degree of protection | EN60529 | |
Usage category | IEC / EN 60947 | |
CE marking | 0080 or 0102, see type label | |
General information | ||
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27144052 |
ECLASS 12.0 | 27144052 |
ECLASS 11.0 | 27144052 |
ECLASS 10.0.1 | 27144052 |
ECLASS 9.0 | 27144052 |
ECLASS 8.0 | 27144052 |
ECLASS 5.1 | 27370401 |
ETIM 9.0 | EC000522 |
ETIM 8.0 | EC000522 |
ETIM 7.0 | EC000522 |
ETIM 6.0 | EC000522 |
ETIM 5.0 | EC000522 |
UNSPSC 12.1 | 39121314 |
Safe mains power disconnection of machines in hazardous areas zones 1 and 2 up to gas group IIB+H 2 as well as in zones 21 and 22 is guaranteed by switch disconnectors in sturdy EJB series enclosures.
Several standard variants are available up to 100 A for AC23 and AC3.
Customization of switching components as well as cable entries allow to tailor the solution exactly to the specific requirements.
Brief Instructions | Språk | Filtype | Filstørrelse |
---|---|---|---|
Instruction Manual EJB | ENG | 256 KB | |
Safety and Security Documentation | |||
Instruction manual EJB empty enclosures | NOR | 166 KB |
Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
---|---|---|---|---|
ECASEx | 23-10-87485/E23-09-089612/NB0002 | ALL | 851 KB | |
ECASEx | 23-10-87483/E23-09-089610/NB0002 | ALL | 850 KB | |
Europe INERIS ATEX | INERIS 14 ATEX 0022X | ALL | 543 KB | |
INERIS IECEx Certificate of Conformity | IECEx INE 14.0029X | ALL | LINK | --- |
UK-Type Examination Certificate | CML 21UKEX1424X | ALL | 148 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0832G | ALL | 387 KB |