USB Fieldbus Power Supply USB-FBPS-1.11.45.NI
- Output: min. 11 V/45 mA
- For 1...2 devices/test setups
- In conjunction with NI PCMCIA-FBUS card
- Permitted for Zone 2 operation
- For FOUNDATION Fieldbus H1
- Compatible with Windows® XP, Vista, 7, 8, or 10
- USB 1.1/2.0 compatible
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for USB-FBPS-1.11.45.NI
| Produktbeskrivelse |
|---|
| USB fieldbus power supply for 1 or 2 field devices with D-sub socket for connecting to National Instruments NI PCMCIA FBUS card |
| General specifications | ||
|---|---|---|
| Design / Mounting | Handheld/mobile | |
| Installation in hazardous area | Zone 2 | |
| Supply | ||
| Connection | USB-Male Connector Typ A (Standard) | |
| Rated voltage | typ. 5 V | |
| Rated current | max. 350 mA | |
| Power dissipation | typ. 250 mW | |
| Fieldbus connection | ||
| Connection | D-Sub socket 9-pin ; pin 6: Bus + , pin 7: Bus - | |
| Rated voltage | min. 11 V | |
| Rated current | 45 mA | |
| Short-circuit current | typ. 60 mA | |
| Terminating resistor | 50 Ω | |
| Indicators/operating means | ||
| LED ERR | red flashing: short-circuit or undervoltage at output | |
| LED PWR | green: Interface Power ON/OK | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Degree of protection | IEC/EN 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Pollution degree | max. 2, according to IEC 60664 | |
| Mechanical specifications | ||
| Connection type | USB-Male Connector Typ A (Standard) | |
| Housing | 56 x 32 x 17 mm | |
| Housing material | Polycarbonate | |
| Degree of protection | IP20 | |
| Mass | approx. 105 g | |
| Data for application in connection with hazardous areas | ||
| Outputs | ||
| Voltage | 17.5 V | |
| Certificate | PF 08 CERT 1303 X | |
| Marking |  II 3G Ex nA II T4 |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242611 |
| ECLASS 12.0 | 27242611 |
| ECLASS 11.0 | 27242611 |
| ECLASS 10.0.1 | 27242611 |
| ECLASS 9.0 | 27242611 |
| ECLASS 8.0 | 27242611 |
| ECLASS 5.1 | 27242611 |
| ETIM 9.0 | EC002583 |
| ETIM 8.0 | EC002583 |
| ETIM 7.0 | EC002583 |
| ETIM 6.0 | EC002583 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121004 |
Details: USB-FBPS-1.11.45.NI
Function
The USB-FBPS-1.11.45.NI fieldbus power supply powers one or two field devices. It connects via D-SUB female connector to the popular NI PCMCIA FBUS card by National Instruments.
This small unit is designed to enable commissioning and maintenance personnel to conduct single field device work typical during plant start-up or maintenance: device configuration download, functional test, and device tagging. The power supply provides the infrastructure from the convenience of a laptop or PC, or any other USB-port.
This device complements the portfolio of FieldConnex ® tools for the fieldbus practitioner on the go. It complements the mobile Diagnostic Module DM-AM for check-out, monitoring, and troubleshooting of single fieldbus segments.
Informative Literature: USB-FBPS-1.11.45.NI
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Product Documentation: USB-FBPS-1.11.45.NI
| Safety and Security Documentation | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction manual | ENG | 46 KB |
Approvals: USB-FBPS-1.11.45.NI
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Pepperl+Fuchs ATEX Category 3 G | PF 08 CERT 1303X | ALL | 206 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0816C | ALL | 1039 KB | |
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.