Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
General specifications | ||
---|---|---|
Function principle | ring magnet as switching element in the float, reed contact, change-over contact number of contacts: - version LML1: 1 contact - version LML2: 2 contacts - version LML3: 3 contacts |
|
Series | LML-P | |
Supply | ||
Rated voltage | 250 V AC/DC | |
Current consumption | 1 A | |
Power consumption | 40 VA | |
Output | ||
Connection | This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. | |
Directive conformity | ||
Low voltage | ||
Directive 2014/35/EU | EN 61010-1:2010 | |
Conformity | ||
Degree of protection | IEC 60529:2000 | |
Operating conditions | ||
Installation conditions | ||
Switching point | position according to specification | |
Process conditions | ||
Process temperature | version PP: -10 ... 80 °C (14 ... 176 °F) version PVDF: -10 ... 100 °C (14 ... 212 °F) |
|
Process pressure (static pressure) | ≤ 3 bar (43.5 psi) | |
Density | ≥ 0.8 g/cm3 | |
Ambient conditions | ||
Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP66 / IP68 | |
Connection | version LML: terminal box, max. 9 terminals version LML-PVC1: connection cable 1 m (3.3 ft), 0.75 mm2 |
|
Material | float, guide tube, process connection: - version PP: PP (Polypropylene) - version PVDF: PVDF (Polyvinylidenfluoride) connection cable: PVC terminal box: Polyester |
|
Dimensions | float: - version PP: cylinder ∅44 mm x 44 mm - version PVDF: cylinder ∅55 mm x 70 mm guide tube: - version D: ∅12 mm, max. length 1000 mm - version P: ∅16 mm, max. length 1000 mm - other lengths on request terminal box: 80 x 82 x 55 mm |
|
Process connection | thread G3/8A, G1-1/2A, G2A to DIN/ISO 228/1 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Accessories | ||
Designation | - LML-Z21 set collar, PP - LML-Z22 set collar, PVDF - LML-FD5 float, cylinder, Ø55 mm x 70 mm, PVDF - LML-FP7 float, cylinder, Ø44 mm x 44 mm, PP |
System | Classcode |
---|---|
ECLASS 13.0 | 27200502 |
ECLASS 12.0 | 27200502 |
ECLASS 11.0 | 27200502 |
ECLASS 10.0.1 | 27200502 |
ECLASS 9.0 | 27200502 |
ECLASS 8.0 | 27200502 |
ECLASS 5.1 | 27200502 |
ETIM 9.0 | EC001447 |
ETIM 8.0 | EC001447 |
ETIM 7.0 | EC001447 |
ETIM 6.0 | EC001447 |
ETIM 5.0 | EC001447 |
UNSPSC 12.1 | 41111950 |
The device is a sensor for limit value detection in liquids.
A ring magnet integrated in the float activates the contacts inside the probe tube via its magnetic field. If the probe strays outside the range of the mechanical contact, it reverts to the output status.
The skipping of switching points caused by abrupt level changes can be avoided using snap-on set collars on the probe tube. The same set collars are also used for latching contact operation.
Safety and Security Documentation | Språk | Filtype | Filstørrelse |
---|---|---|---|
Instruction manual | ENG | 43 KB | |
Manuals | |||
Manual | ENG | 2114 KB |
Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2593A | ALL | 73 KB | |
Contamination Declaration | ||||
Contamination declaration / Kontaminationserklärung | ALL | 137 KB |