Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for
9408 10*10
| Produktbeskrivelse |
| Double loop coupling 10 x 10 |
| Ambient conditions |
| Operating temperature | -30 ... 80 °C (-22 ... 176 °F) |
| Mechanical specifications |
| Shaft diameter | 10 mm |
| Material | |
| Fastener | Polyurethane |
| End piece | Zinc plated steel |
| Mass | 85 g |
| Rotational speed | max. 3000 min |
| Max. torque | 2 Nm |
| Radial offset | max. ± 3 mm |
| Axial offset | max. ± 4 mm |
| Angle error | max. ± 12 ° |
| Torsion spring stiffness | 28 Nm / rad |
| Radial spring stiffness | 7 N / mm |
| Moment of inertia | 106 kg m2 x 10-7 |
| Mounting | clamp screws M4 x 6, DIN 916 |
| Tightening torque of clamping screws | max. 1 Nm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270592 |
| ECLASS 12.0 | 27270592 |
| ECLASS 11.0 | 27270592 |
| ECLASS 10.0.1 | 27270592 |
| ECLASS 9.0 | 27270592 |
| ECLASS 8.0 | 27279103 |
| ECLASS 5.1 | 27270591 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 23153016 |
Details:
9408 10*10
Design / Simulation:
9408 10*10
Relaterte produkter:
9408 10*10
| Accessory of |
|
|
|
| Housing ∅ 58 mm, Solid shaft, Servo or clamping flange, Up to 5000 ppr, Universal output driver, Enclosure type: 58 mm, Type of shaft: Solid shaft, Interface: push-pull, incremental, Detection type: photoelectric sampling, Output type: push-pull or RS422 (universal output driver, output level depending on input voltage)fa |
|
+47 3557 3800