RFID read/write device IUH-F192-V1-FR2-02
- Flexible UHF read/write head with long range for use worldwide
- Ready-made PLC function blocks designed for quick and easy system integration
- Compact and robust housing for harsh industrial environments
- Switchable antenna polarization guarantees reliable tag detection and enhances process flow
- For connection to IDENTControl evaluation unit
- Multi-tag reading increases productivity
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for IUH-F192-V1-FR2-02
| Produktbeskrivelse |
|---|
| UHF RFID read/write device for IDENTControl, USA, Canada and Argentina |
| General specifications | ||
|---|---|---|
| Operating frequency | 902 … 928 MHz: USA, Canada, Argentina Transmission licenses for other countries on request |
|
| Emitted power | 10 ... 4000 mW EIRP adjustable | |
| MTBF | 64 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | Read/write operation successful | |
| LED blue | Transmission mode | |
| Electrical specifications | ||
| Power consumption | ≤ 10 W | |
| Supply | from the IDENTControl | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 18000-63 | |
| Approvals and certificates | ||
| UL approval | E468231 cULus Listed, Class 2 Power Source, Type 1 enclosure |
|
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| Radio approval | USA: FCC IREIUHF192V1B Canada: 7037A-IUHF192V1B Argentina: H-31068 |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PA 6 | |
| Base | diecast aluminum | |
| Mass | approx. 3000 g | |
| Dimensions | ||
| Height | 81 mm | |
| Width | 270 mm | |
| Length | 268 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IUH-F192-V1-FR2-02
Function
The IUH-F192-V1-FR2-02 read/write head operates in the UHF frequency range and is optimized for use in industrial applications involving greater distances. The device reads and writes passive tags according to EPC Generation 2 (ISO/IEC 18000-63). The read/ write head can be operated in the USA, Canada and Argentina. The read/write head complies with the respective radio regulations.
Wide range of options supported for filtering data. The read/write head is connected to the IDENTControl interface using an M12 connector. The user can monitor the status of the read/write head using the integrated LEDs.
The read/write head has a typical detection range of approx. 3 meters; this range is determined by the tag used and can be changed by adjusting the transmission power. Other influencing factors are the application specific setup and surrounding materials, particularly metal. The read and write distances measured under ideal conditions can be found in a separate document. For the actual read and write distances under real conditions, the combination of read/write head and tag must be tested in the intended application.
Informative Literature: IUH-F192-V1-FR2-02
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Application Report - Fully Automatic Component Tracking for Prefabricated Home Production | ENG | 205 KB | |
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB |
Product Documentation: IUH-F192-V1-FR2-02
| Manuals | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Manual IUH-F192-V1-* | ENG | 2276 KB |
Design / Simulation: IUH-F192-V1-FR2-02
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 5360 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: IUH-F192-V1-FR2-02
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Argentina Radio Approval | H-31068 | ALL | 162 KB | |
| Canada Radio Approval | 7037A-IUHF192V1B | ALL | 736 KB | |
| Canada, USA UL | CoC 2022-12-20-E468231 | ALL | 530 KB | |
| USA FCC Approval | IREIUHF192V1B | ALL | 188 KB |
Relaterte produkter: IUH-F192-V1-FR2-02
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …
Vi har utviklet en spesiell nettside som skal fungere som en kunnskapsbase for RFID-teknologi. Der finner du svar på vanlige spørsmål, og der kan du få informasjon om vanlige RFID-applikasjoner...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.