RFID read/write device IUT-F190-R4-V1-FR2-02
- Flexible UHF read/write device with medium detection range
- Compact and robust housing for harsh industrial environments
- Switchable antenna polarization guarantees reliable tag detection and enhances process flow
- Connection via integrated RS-485 interface
- Multi-tag reading increases productivity
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for IUT-F190-R4-V1-FR2-02
| Produktbeskrivelse |
|---|
| UHF RFID read/write device, USA and Canada |
| General specifications | ||
|---|---|---|
| Operating frequency | 902 … 928 MHz: USA, Canada Transmission licenses for other countries on request |
|
| Emitted power | 3 … 1250 mW EIRP adjustable | |
| UL File Number | E468231 | |
| MTBF | 105 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | Read/write operation successful | |
| LED blue | Transmission mode | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS | |
| Current consumption | ≤ 450 mA | |
| Power consumption | ≤ 9 W | |
| Surge protection | category 2 | |
| Interface | ||
| Physical | RS-485 point-to-point connection | |
| Protocol | ASCII | |
| Transfer rate | 1200, 2400, 4800, 9600, 19200, 38400 (default) Bit/s | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 18000-63 | |
| Approvals and certificates | ||
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| Ambient conditions | ||
| Classification | Environmental condition A (controlled environment) | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) (Operation with nontransmission periods, adjustable) -20 ... 60 °C (-4 ... 140 °F) (Continuous transmission mode) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PA 6.6 | |
| Base | diecast aluminum | |
| Mass | 860 g | |
| Dimensions | ||
| Height | 63 mm | |
| Width | 112 mm | |
| Length | 114 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IUT-F190-R4-V1-FR2-02
Function
The compact IUT-F190-R4-V1-FR2-02 read/write station operates in the UHF frequency range and is optimized for industrial use at medium distances. The device writes and reads passive transponders according to EPC Gen2 (ISO/IEC 18000-63). The read/write station can be used in the USA and Canada. The read/write station is compliant with the relevant radio regulations.
Wide range of options supported for filtering data. The read/write station has an RS-485 interface and is connected via an M12 connector. The user can monitor the status of the read/write station using the integrated LEDs.
The read/write station has a typical detection range of approximately 2 m, which is determined by the transponder used and can be adjusted by the setting of the transmission power. Other influencing factors include the setup and installation of the specific application and the surrounding materials, in particular metal. The separately specified read and write distances for the respective transponders have been determined in a test laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination of read/write station and transponder must be tested in the desired application.
Informative Literature: IUT-F190-R4-V1-FR2-02
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Product Information - RFID UHF-F190 Portfolio | ENG | 856 KB | |
| Application Report - Clear Identification of Green Tires During Vulcanization | ENG | 320 KB | |
| Application Report - Fully Automatic Component Tracking for Prefabricated Home Production | ENG | 205 KB | |
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB |
Product Documentation: IUT-F190-R4-V1-FR2-02
| Manuals | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Manual IUH-F190-V1-*, IUT-F190-R4-V1* | ENG | 2490 KB | |
| Manual Read / Write Ranges and Passing Speeds RFID | ENG | 3640 KB |
Approvals: IUT-F190-R4-V1-FR2-02
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Canada Radio Approval | 17-111662 | ALL | 576 KB | |
| Canada, USA UL | CoC 2021-12-14-E468231 | ALL | 509 KB | |
| USA FCC Approval | IREIUHF190V1B | ALL | 206 KB |
Relaterte produkter: IUT-F190-R4-V1-FR2-02
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …
Vi har utviklet en spesiell nettside som skal fungere som en kunnskapsbase for RFID-teknologi. Der finner du svar på vanlige spørsmål, og der kan du få informasjon om vanlige RFID-applikasjoner...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.