Headset LiteCom PRO III Ex Helmet 403-470 MHz
- Programmable analog/digital DMR two-way radio communication
- Bluetooth® multipoint functionality
- Water tight microphone (IP68)
- Environmental listening with level-dependent hearing protection
- Voice menu with multiple language selection
- Push-to-Listen function
- Rechargeable Li-Ion battery and battery status indication
- Voice operated transmission (VOX)
- Busy channel indication
- Auto power off function
- ATEX and IECEx approvals
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for LiteCom PRO III Ex Helmet 403-470 MHz
| Produktbeskrivelse |
|---|
| 3M™ PELTOR™ WS™ LiteCom Pro III Ex Headset, 403-470 MHz, Analog/Digital, Ex, EU version, Helmet |
| General specifications | ||
|---|---|---|
| Description | Helmet Mount | |
| Hardware | ||
| Microphone | Dynamic (MT73) | |
| Two-way radio | ||
| Frequency range | 403 ... 470 MHz | |
| Operating mode | Simplex | |
| Channels | 70 programmable channels | |
| Channel grid | 12,5 kHz and 25 kHz | |
| Modulation | Analog: 2,5 kHz (FM) and 5 kHz (FM) Digital: 2,5 kHz (4-level FSK) |
|
| Sensitivity (Receiver) | Typical -120 dBm | |
| Selective squelch | Programmable (supports CTCSS and DCS) | |
| Power Output | 200 / 20 / 10 mW ER | |
| Detection range | Outdoors up to 2 km depending on conditions | |
| Electrical specifications | ||
| Battery type | Li-ion 3.7 V , 1350 mAh , 5 Wh | |
| Charging time | approx. 12 h | |
| Operating duration | 8 h * (90 stby / 5 tx / 5 rx) * can be increased up to 12 hours with the power save feature |
|
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 55 °C (-4 ... 131 °F) < 90 % Humidity |
|
| Mechanical specifications | ||
| Mass | 512 g | |
| Data for application in connection with hazardous areas | ||
| ATEX approval | ||
| ATEX certificate | Presafe 16ATEX8960X | |
| ATEX marking | I M1 Ex ia I Ma -20°C ≤ Ta: ≤ +50°C II 1G Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +50°C Ga II 1D Ex ia IIIC T130°C Da -20°C ≤ Ta ≤ +50°C |
|
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | Presafe 16.0086X | |
| IECEx marking | Ex ia I Ma -20°C ≤ Ta: ≤ +50°C Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +50°C Ex ia IIIC T130°C Da -20°C ≤ Ta ≤ +50°C |
|
| General information | ||
| Scope of delivery | 3M™ PELTOR™ WS™ LiteCom Pro III Ex headset. Battery ACK082 Power supply FR08 Cable AL2AH (for ACK082) Hygiene kit HY83 Documentation |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 19069090 |
| ECLASS 12.0 | 19069090 |
| ECLASS 11.0 | 19069090 |
| ECLASS 10.0.1 | 19069290 |
| ECLASS 9.0 | 19069290 |
| ECLASS 8.0 | 19069290 |
| ECLASS 5.1 | 19069290 |
| ETIM 9.0 | EC002696 |
| ETIM 8.0 | EC002696 |
| ETIM 7.0 | EC002696 |
| ETIM 6.0 | EC002696 |
| ETIM 5.0 | EC002696 |
| UNSPSC 12.1 | 43191507 |
Details: LiteCom PRO III Ex Helmet 403-470 MHz
Function
The 3M™ PELTOR™ WS™ LiteCom Pro III Ex Headset is the next generation protective communication solution. With an integrated, programmable analog/digital two-way radio, Bluetooth® Multipoint connectivity, noise-cancelling speech microphone, and level-dependent function for ambient listening, the 3M™ WS™ LiteCom Pro III Ex Headset not only helps protect you against potentially hazardous noise, but also makes it easy to communicate in noisy environments and helps you maintain situational awareness.
Approvals: LiteCom PRO III Ex Helmet 403-470 MHz
| Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5242 | ALL | 338 KB |
Relaterte produkter: LiteCom PRO III Ex Helmet 403-470 MHz
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.