Intrinsically safe digital multimeter 28 II EX ATEX/IECEx

Fluke

CAT III 1000 V / CAT IV 600 V
Dustproof, waterproof (IP67)
Measures up to 1000V / 10A (outside of the Ex-hazardous area)
Min/Max/Avg and Peak capture
Low pass filter for accurate measurements on variable speed motor drives
4½“ digit display (20,000 counts) with backlight
Input Alert

Technical Data
Product Documentation
Approvals
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for 28 II EX ATEX/IECEx

Produktbeskrivelse
Rugged and intrinsically safe multimeter

General specifications
Measuring range
	DC voltage	0.1 mV to 1000 V Accuracy: ± (0.05 % + 1)
	AC voltage	0.1 mV to 1000 V Accuracy: ± (0.7 % + 4)
	DC current	0.1 µA to 10 A Accuracy: ± (0.2 % + 4)
	AC current	0.1 µA to 10 A Accuracy: ± (1.0 % + 2)
	Resistor	0.1 Ω to 50 MΩ Accuracy: ± (0.2 % + 1)
	Conductivity	60.00 nS Accuracy: ± (1.0 % + 10)
	Diode test	2.0 V Accuracy: ± (2.0 % + 1)
	Duty cycle	0.0 % to 99.9 % Accuracy: Within ± (0.2 % per kHz + 0.1 %) for rise times <1 µs
	Display count rate	6,000 counts / 19,999 counts in high-resolution
	Capacitance	10 nF to 9999 µF Accuracy: ± (1.0 % + 2)
	Frequency	0.5 Hz to 199.99 kHz Accuracy: ± (0.005 % + 1)
	Temperature	-200 °C to +1090 °C (-328 °F to +1994 °F) Accuracy: ± (1.0 % + 10) °C [± (1.0 + 10) °F] Error: % of reading + number of digits
Indicators/operating means
Display		LC display with backlight
Electrical specifications
Battery type		3x AAA, type-proofed
Operating duration		approx. 400 h
Ambient conditions
Ambient temperature		Different temperature ranges result from the type-tested batteries used.
Storage temperature		-40 ... 60 °C (-40 ... 140 °F) , without batteries
Mechanical specifications
Degree of protection		IP67
Mass		approx. 690 g
Dimensions		approx. 210 mm x 100 mm x 64 mm (with holster)
Data for application in connection with hazardous areas
ATEX approval
	Type examination certificate	PTB 11 ATEX 2028 X
	ATEX marking	II 2G Ex ia IIC T4 Gb I M1 Ex ia I Ma
International approvals
IECEx approval
	IECEx certificate	IECEx PTB 11.0080X
	IECEx marking	Ex ia IIC T4 Gb Ex ia I Ma
General information
Note		Remarks: Measurement inside the hazardous area: Ui ≤ 65V, Ii ≤ 5A Measurement outside the hazardous area: Ui ≤ 1000V, Ii ≤ 10A
Scope of delivery		Fluke 28 II EX Ex-holster Alligator clips AC175 Test leads TL175 Batteries Documentation

Classifications

System	Classcode
ECLASS 13.0	27200390
ECLASS 12.0	27200390
ECLASS 11.0	27200390
ECLASS 10.0.1	27200390
ECLASS 9.0	27200390
ECLASS 8.0	27200390
ECLASS 5.1	27200390
ETIM 9.0	EC000069
ETIM 8.0	EC000069
ETIM 7.0	EC000069
ETIM 6.0	EC000069
ETIM 5.0	EC000069
UNSPSC 12.1	41113630

Details: 28 II EX ATEX/IECEx

Product Documentation: 28 II EX ATEX/IECEx

Safety and Security Documentation	Språk	Filtype	Filstørrelse
Safety Note / Sicherheitshinweis	ALL	PDF	109 KB

Approvals: 28 II EX ATEX/IECEx

Certificates	Sertifikatnummer	Språk	Filtype	Filstørrelse
PTB ATEX	PTB 11 ATEX 2028 X	ALL	PDF	5322 KB
Worldwide PTB IECEx Certificate of Conformity	IECEx PTB 11.0080X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)	DOC-5320A	ALL	PDF	89 KB

Relaterte produkter: 28 II EX ATEX/IECEx

Accessories

	Spare fuse assembly 440mA Replacement protection module
	Replacement protection module 440mA for Fluke 28 II EXpa

	80PK-27 Industrial surface temperature probe
	Industrial surface temperature probe for Fluke 28 II Expa

	Leather case w/ carrying strap Leather bag
	Leather case with carrying strap for Fluke 28 II Expa

	i400 AC current clamp
	AC current clamp for Fluke 28 II Expa

	TL175 Test leads
	Test leads with adjustable length test tips for Fluke 28 II Expa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Snarveier

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.