Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-Z1-1
- Installation in Zone 1, 21
- Installation in Class I, II, Division 1
- Installation in Class III
- Ex d housing for Ex d field devices
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for WHA-BLT-F9D0-N-A0-Z1-1
| Supply | ||
|---|---|---|
| Rated voltage | 7 ... 32 V DC | |
| Rated current | < 1 mA , max. 25 mA | |
| Electrical specifications | ||
| Output current | 3.2 ... 25 mA | |
| Supply | loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V |
|
| Input | ||
| Connection | - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point |
|
| HART communication | ||
| Protocol | HART 7.1, backward compatible | |
| Number of devices | up to 8 HART field devices (depending on installation) | |
| Output | ||
| Interface | internal antenna | |
| Communication | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART acc. to IEC 62591 |
|
| Directive conformity | ||
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. | |
| Directive 2014/53/EU | EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017 |
|
| FCC CFR47 Part 15 B and C | ANSI C63.4-2003 , FCC ID: X89-WA1101 | |
| Conformity | ||
| Degree of protection | IEC 60529:2013 | |
| Ambient conditions | ||
| Ambient temperature | temperature class T5: -40 ... 85 °C (-40 ... 185 °F) temperature class T6: -40 ... 75 °C (-40 ... 167 °F) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 100 % | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Material | aluminum alloy with polyurethane enamel paint | |
| Mass | 460 g | |
| Dimensions | 60.8 x 60.8 x 100 mm (l x w x h) | |
| Height | 100 mm | |
| Diameter | 60.8 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | FM 17 ATEX 0046 X | |
| Marking |  II 2 G Ex db IIC T6...T5 Gb II 2 D Ex tb IIIC T95°C Db |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-1:2014 , EN 60079-31:2014 | |
| International approvals | ||
| FM approval | FM 17 NUS 0010 FM 17 US 0191 X |
|
| Control drawing | 116-0425 (cFMus) | |
| Approved for | XP Class I, II, III, Division 1, Groups A-G Class I, Zone 1, AEx db IIC T6...T5 Gb Zone 21, AEx tb IIIC T95°C Db |
|
| CSA approval | FM 17 NCA 0004 FM 17 CA 0102 X |
|
| Control drawing | 116-0425 (cFMus) | |
| Approved for | XP Class I, II, III, Division 1, Groups A-G Ex db IIC T6...T5 Gb Ex tb IIIC T95°C Db |
|
| IECEx approval | ||
| IECEx certificate | IECEx FMG 17.0020X | |
| IECEx marking | Ex db IIC T6...T5 Gb , Ex tb IIIC T95°C Db | |
| Standards | IEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-31:2013 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC002584 |
| ETIM 8.0 | EC002584 |
| ETIM 7.0 | EC002584 |
| ETIM 6.0 | EC002584 |
| ETIM 5.0 | EC002584 |
| UNSPSC 12.1 | 39121008 |
Details: WHA-BLT-F9D0-N-A0-Z1-1
Function
The device upgrades a conventional HART or 4 ... 20 mA field device with a WirelessHART interface.
The supply is ensured via loop power. The adapter with type of protection Ex d can be used directly on a field device with type of protection Ex d. Up to 8 HART field devices can be connected to each other in multidrop mode. The encapsulated antenna allows for use in harsh environments.
The device can be programmed with a configuration tool easily (DTM or DD).
Informative Literature: WHA-BLT-F9D0-N-A0-Z1-1
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Application Report - Outdoor Monitoring of Gas Limit Values | ENG | 158 KB | |
| Application Report - WirelessHART Adapter Bullet Enables More Flexibility for Mobile Mixing Tanks | ENG | 129 KB | |
| Application Report - WirelessHART Connects Mobile Measurement Stations | ENG | 149 KB | |
| Application Report - Wirelessly Networked Tank Farms | ENG | 736 KB |
Product Documentation: WHA-BLT-F9D0-N-A0-Z1-1
| System Descriptions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Patent Information | ENG | 365 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 131 KB | |
| Manuals | |||
| Manual | ENG | 2085 KB | |
Approvals: WHA-BLT-F9D0-N-A0-Z1-1
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Europe FM ATEX ia 1G ATEX ia 1D | FM 17 ATEX 0046X | ALL | 301 KB | |
| Korea KOSHA | 21-AV4BO-0226X | ALL | 462 KB | |
| Control Drawings | ||||
| Control drawing CSA / Control drawing CSA | ALL | 187 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3835D | ALL | 78 KB | |
Software: WHA-BLT-F9D0-N-A0-Z1-1
| Device Description Files/Drivers | Frigivelsesinfo | Filtype | Filstørrelse |
|---|---|---|---|
| DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 16481 KB | |
| FHX-File WirelessHART Adapter WHA-BLT* "Bullet" / FHX-Datei WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 1115 KB | |
| DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 3513 KB |
Relaterte produkter: WHA-BLT-F9D0-N-A0-Z1-1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
© 2024 Med enerett.
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.