Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
NMB10-18GH50-E2
General specifications |
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 10 mm |
Installation | flush in mild steel |
Output polarity | DC |
Assured operating distance | 0 ... 8.1 mm |
Reduction factor rAl | 0.4 |
Reduction factor rCu | 0.25 |
Reduction factor r304 | 0.5 (0.9 of material thickness 2 mm) |
Reduction factor rSt37 | 1 |
Output type | 3-wire |
Nominal ratings |
Installation conditions | |
| A | 0 mm |
| B | 16 mm |
| C | 30 mm |
| F | 60 mm |
Operating voltage | 10 ... 30 V |
Switching frequency | 0 ... 300 Hz |
Hysteresis | 3 ... 15 typ. 5 % |
Reverse polarity protection | yes |
Short-circuit protection | yes |
Voltage drop | ≤ 2 V |
Operating current | 0 ... 200 mA |
Off-state current | ≤ 0.1 mA |
No-load supply current | ≤ 10 mA |
Time delay before availability | ≤ 40 ms |
Switching state indicator | LED, yellow |
Limit data |
Operating pressure statically | 60 bar (870.2 psi) max. |
Functional safety related parameters |
MTTFd | 655 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
Mechanical specifications |
Connection type | cable TPE-S , 2 m 3 x 0.34 mm2 |
Housing material | Stainless steel 1.4435 / AISI 316L |
Sensing face | Stainless steel 1.4435 / AISI 316L |
Degree of protection | IP68 / IP69K |
Mass | 112 g |
Dimensions | |
| Length | 70 mm |
| Diameter | 18 mm |
General information |
Assembly dimensions | x: 18 mm y: ≥ 4 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27274001 |
ECLASS 12.0 | 27274001 |
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NMB10-18GH50-E2
Design / Simulation:
NMB10-18GH50-E2
Approvals:
NMB10-18GH50-E2
İlişkili Ürünler:
NMB10-18GH50-E2
Accessories |
|
|
|
Mounting flange, 18 mmfa |
|