Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
VAA-2E1A-IER1-S-1M-V1
Ürün Açıklaması |
Reed safety switch for non-contact AS-Interface safety switches |
General specifications |
Detection type | magnetic |
assured start-up distance | 9 mm |
assured release distance | max. 70 mm |
Center offset | ± 2.5 mm at distance s = 3 mm |
Node type | Safety-Slave |
AS-Interface specification | V2.1 |
Required gateway specification | ≥ V2.0 |
Response delay | < 5 ms |
UL File Number | E155795 |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 3 |
Performance level (PL) | PL e |
Mission Time (TM) | 20 a |
PFHd | 4.29 E-8 |
Indicators/operating means |
LED 1 | programmable |
LED AS-i | green: normal operation red: no data exchange red/yellow flashing: no data exchange Red/green flashing: Device error in the slave red flashing: Device error in the slave |
Electrical specifications |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
Rated operating current | ≤ 30 mA |
Power supply | via AS-Interface network |
Output |
Number/Type | LED red |
Switching voltage | 24 V |
Switching current | max. 0.5 A |
Supply | from AS-Interface |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 62026-2:2013 IEC 60947-5-3:1999 |
Machinery Directive | |
| Directive 2006/42/EC | EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008 |
Standard conformity |
Degree of protection | EN 60529:2000 |
AS-Interface | EN 62026-2:2013 |
Functional safety | ISO 13849-1:2008 (up to category 3/PL e) EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008 |
Programming instructions |
Profile | S-7.B |
IO code | 7 |
ID code | B |
ID1 code | F |
ID2 code | E |
Data bits (function via AS-Interface) | InputOutput |
| D0 | dyn. safety code 1 - |
| D1 | dyn. safety code 1 LED 1 |
| D2 | dyn. safety code 2 - |
| D3 | dyn. safety code 2 - |
Parameter bits (programmable via AS-i) | |
| P0 | IN1 - |
| P1 | IN2 - |
| P2 | IN3 - |
| P3 | IN4 - |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Shock and impact resistance | 30 g/11 ms |
Mechanical specifications |
Degree of protection | IP67 |
Connection | with fixed cable and M12 connector, 4-pin |
Material | |
| Housing | PPS |
| Cable | PUR |
Installation | any position |
Dimensions | |
| Width | 25 mm |
| Depth | 13 mm |
| Length | 87.5 mm |
Cable length | 1 m |
Life span | 100 x 106 switching cycles |
Classifications
System | Classcode |
ECLASS 13.0 | 27272603 |
ECLASS 12.0 | 27272603 |
ECLASS 11.0 | 27272603 |
ECLASS 10.0.1 | 27272603 |
ECLASS 9.0 | 27272603 |
ECLASS 8.0 | 27272603 |
ECLASS 5.1 | 27272603 |
ETIM 9.0 | EC001599 |
ETIM 8.0 | EC001599 |
ETIM 7.0 | EC001599 |
ETIM 6.0 | EC001599 |
ETIM 5.0 | EC001599 |
UNSPSC 12.1 | 39121535 |
Details:
VAA-2E1A-IER1-S-1M-V1
Product Documentation:
VAA-2E1A-IER1-S-1M-V1
Design / Simulation:
VAA-2E1A-IER1-S-1M-V1
Approvals:
VAA-2E1A-IER1-S-1M-V1
Software:
VAA-2E1A-IER1-S-1M-V1
İlişkili Ürünler:
VAA-2E1A-IER1-S-1M-V1
Matching System Components |
|
|
|
Actuator for non-contact AS-Interface Reed safety switchfa |
|