Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Ürün Açıklaması |
---|
Base for PROFIBUS DP |
Indicators/operating means | ||
---|---|---|
DIP switch | Setting the station address bus connection ON = active OFF = non-active |
|
Electrical specifications | ||
Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS , PELV | |
Power consumption | max. 5 W with read/write head IPT*-FP | |
Galvanic isolation | ||
Operating voltage/interface | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
Interface | ||
Physical | RS-485 | |
Protocol | PROFIBUS DP acc. to EN 50170 | |
Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 according to EN 60529 with IPT*-FP | |
Connection | screw terminals | |
Interface cable | 2 x 0.64 mm2, double screened, acc. to PROFIBUS standard EN 50170 | |
Supply | up to 3 x 1.5 mm2 | |
Material | ||
Housing | aluminum, black anodized | |
Dimensions | ||
Height | 50 mm | |
Width | 80 mm | |
Length | 161 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27280492 |
ECLASS 12.0 | 27280490 |
ECLASS 11.0 | 27280490 |
ECLASS 10.0.1 | 27280490 |
ECLASS 9.0 | 27280490 |
ECLASS 8.0 | 27280490 |
ECLASS 5.1 | 27279212 |
ETIM 9.0 | EC002997 |
ETIM 8.0 | EC002997 |
ETIM 7.0 | EC002997 |
ETIM 6.0 | EC002997 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 31162301 |
The base is used in combination with an upper part, the IPT*-FP read/write station.
The device is operated as a slave on the PROFIBUS DP. The device makes available the complete read/write functionality. Up to 32 bytes are transmitted per cycle. Of these, up to 7 double words, each with 32 bits, are available to the user.
The address is set and the terminating resistor for the bus is connected via DIP switches.
While the bus termination is switched on, the subsequent subscribers which are connected to the terminals (P, N out) are disconnected from the bus.
Brief Instructions | Dil | Dosya Tipi | Dosya Boyutu |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 170 KB | |
Programming Proposal in "Enhanced Buffered Read FIXCODE" Mode | ENG | 96 KB | |
Programming Proposal in "Enhanced Buffered Read" Mode | ENG | 96 KB | |
Manuals | |||
Manual IPTx-FP with U-P6x-B6x | ENG | 2364 KB |
CAD | Dil | Dosya Tipi | Dosya Boyutu |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 469 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
Declaration of Conformity | Sertifika No. | Dil | Dosya Tipi | Dosya Boyutu |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5411 | ALL | 108 KB |
Device Description Files/Drivers | Sürüm Bilgileri | Dosya Tipi | Dosya Boyutu |
---|---|---|---|
GSD file U-P6*-B6* / GSD-Datei U-P6*-B6* | 08/2005 | ZIP | 2 KB |
Function block TIA Portal (S7-1200/1500) for System IP with IPT1-FP and U-P6-B6 Profibus-DP communication / Funktionsbaustein TIA Portal (S7-1200/1500) für System IP mit IPT1-FP und U-P6-B6 Profibus-DP Kommunikation | V1.0 | ZIP | 10184 KB |
SIMATIC S7 sample project file for PROFIBUS DP with U-P6-B6 / SIMATIC S7 Beispielprojekt für PROFIBUS DP Anbindung mit U-P6-B6 | 08/2005 | ZIP | 186 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|