Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
IQH1-FP-C1D1
| Ürün Açıklaması |
| HF read/write head, ISO 15693, for IDENTControl, hazardous areas |
| General specifications |
| Operating frequency | 13.56 MHz |
| Transfer rate | 26 kBit/s |
| Sensing range | |
| Read distance | 0 ... 44 mm |
| Write distance | 0 ... 44 mm |
| Width | max. 48 mm |
| UL File Number | E254700 |
| MTBF | 340 a (Operation at +40 °C) |
| Indicators/operating means |
| LED green/yellow | green: power on
green flashing: read/write attempt performed
yellow: data carrier detected |
| Electrical specifications |
| Power consumption | ≤ 1.3 W |
| Supply | from the IDENTControl |
| Standard conformity |
| Electromagnetic compatibility | EN 301489-1
EN 301489-3
EN 300330 |
| Degree of protection | EN 60529 |
| Safety | EN 62368-1 |
| RFID | ISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3 |
| Approvals and certificates |
| UL approval | Class I, Division 1, Groups C, D |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | NEMA Type 4, 7, 9 |
| Connection | Terminals |
| Material | |
| Housing | diecast aluminum |
| Base | diecast aluminum |
| Installation | |
| Distance between two heads | Multiplex on: ≥ 65 mm
Multiplex off: ≥ 115 mm |
| Mass | approx. 4080 g |
| Dimensions | |
| Height | 140 mm |
| Width | 157 mm |
| Length | 157 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details:
IQH1-FP-C1D1
Design / Simulation:
IQH1-FP-C1D1
Approvals:
IQH1-FP-C1D1
| Certificates | Sertifika No. | Dil | Dosya Tipi | Dosya Boyutu |
| USA FCC Approval | IREIQH1-FP-V1 | ALL | PDF | 64 KB
|
İlişkili Ürünler:
IQH1-FP-C1D1
| Accessories |
|
|
|
| Control interface unit IDENTControl with PROFIBUS DP interfacefa |
|
|
|
|
| IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa |
|
|
|
|
| Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485fa |
|
|
|
|
|
| IDENTControl Compact RFID evaluation unit with interface for PROFIBUS DPfa |
|
|
|
|
| IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocolsfa |
|
|
|
|
| IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
+90 216 577 2250