Fabrika Otomasyonu
Proses Otomasyonu

RFID read/write device IUT-F190-R4-V1-FR2-02

IUT-F190-R4-V1-FR2-02
  • Flexible UHF read/write device with medium detection range
  • Compact and robust housing for harsh industrial environments
  • Switchable antenna polarization guarantees reliable tag detection and enhances process flow
  • Connection via integrated RS-485 interface
  • Multi-tag reading increases productivity

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  IUT-F190-R4-V1-FR2-02

Ürün Açıklaması
UHF RFID read/write device, USA and Canada
General specifications
Operating frequency902 … 928 MHz: USA, Canada
Transmission licenses for other countries on request
Emitted power3 … 1250 mW EIRP adjustable
UL File NumberE468231
MTBF105 a (Operation at +40 °C)
Indicators/operating means
LED greenPower on
LED yellowRead/write operation successful
LED blueTransmission mode
Electrical specifications
Rated operating voltage20 ... 30 V DC , ripple 10 %SS
Current consumption≤ 450 mA
Power consumption≤ 9 W
Surge protectioncategory 2
Interface
Physical RS-485 point-to-point connection
ProtocolASCII
Transfer rate1200, 2400, 4800, 9600, 19200, 38400 (default) Bit/s
Standard conformity
Degree of protectionEN 60529
RFIDISO/IEC 18000-63
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Ambient conditions
ClassificationEnvironmental condition A (controlled environment)
Ambient temperature-20 ... 70 °C (-4 ... 158 °F) (Operation with nontransmission periods, adjustable)
-20 ... 60 °C (-4 ... 140 °F) (Continuous transmission mode)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Pollution degree2
Mechanical specifications
Degree of protectionIP67
Connectionconnector M12 x 1
Material
HousingPA 6.6
Basediecast aluminum
Mass860 g
Dimensions
Height63 mm
Width112 mm
Length114 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IUT-F190-R4-V1-FR2-02

Function

The compact IUT-F190-R4-V1-FR2-02 read/write station operates in the UHF frequency range and is optimized for industrial use at medium distances. The device writes and reads passive transponders according to EPC Gen2 (ISO/IEC 18000-63). The read/write station can be used in the USA and Canada. The read/write station is compliant with the relevant radio regulations.

Wide range of options supported for filtering data. The read/write station has an RS-485 interface and is connected via an M12 connector. The user can monitor the status of the read/write station using the integrated LEDs.

The read/write station has a typical detection range of approximately 2 m, which is determined by the transponder used and can be adjusted by the setting of the transmission power. Other influencing factors include the setup and installation of the specific application and the surrounding materials, in particular metal. The separately specified read and write distances for the respective transponders have been determined in a test laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination of read/write station and transponder must be tested in the desired application.

Informative Literature: IUT-F190-R4-V1-FR2-02

Dil Seçeneği:
LiteratureDilDosya TipiDosya Boyutu
Product Information - RFID UHF-F190 PortfolioENGPDF856 KB
Application Report - Clear Identification of Green Tires During VulcanizationENGPDF320 KB
Application Report - Fully Automatic Component Tracking for Prefabricated Home ProductionENGPDF205 KB
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB

Product Documentation: IUT-F190-R4-V1-FR2-02

Dil Seçeneği:
ManualsDilDosya TipiDosya Boyutu
Manual IUH-F190-V1-*, IUT-F190-R4-V1*ENGPDF2490 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB

Approvals: IUT-F190-R4-V1-FR2-02

Dil Seçeneği:
CertificatesSertifika No.DilDosya TipiDosya Boyutu
Canada Radio Approval17-111662ALLPDF576 KB
Canada, USA ULCoC 2021-12-14-E468231ALLPDF509 KB
USA FCC ApprovalIREIUHF190V1BALLPDF206 KB

İlişkili Ürünler: IUT-F190-R4-V1-FR2-02

Accessories
RFID Transponderfa
RFID Transponderfa
RFID Transponderfa
RFID Transponderfa
Mounting bracket for wall mountingfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Endüstriyel Ethernet Arayüzüne ve REST API'ye Sahip RFID Okuma/Yazma Cihazı IUT-F190-B40

Orta algılama aralıkları için tasarlanan ve OT ve BT sistemlerine hızlı ve kolay bir şekilde entegre edilebilen yeni IUT-F190-B40'a göz atın …

RFID Hub'ı ziyaret edin

RFID için bir bilgi bankası niteliği taşıyan özel "RFID Hub" web sitemizi ziyaret edin. Sık sorulan sorulara yanıt alın ve tipik RFID uygulamaları hakkında bilgi edinin…