RFID read/write device IUT-F190-B40-2V1D-FR2-10
- Compact, high-performance UHF RFID read/write device for medium detection ranges
- Rugged housing for harsh industrial environments
- Switchable antenna polarization and multi-tag reading
- Clearly visible LED status indicator
- Integrated 2-port switch enables line or ring topology
- Simple operation and configuration via integrated web server
- OPC UA Server and AutoID Companion Specification enable standardized communication
- Easy integration into IT systems via REST API
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of IUT-F190-B40-2V1D-FR2-10
| Product Description |
|---|
| UHF RFID read/write device, Australia |
| General specifications | ||
|---|---|---|
| Operating frequency | 920 MHz … 926 MHz: Australia Transmission licenses for other countries on request |
|
| Emitted power | 3 … 1000 mW EIRP adjustable | |
| MTBF | 55 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | Read/write operation successful | |
| LED blue | Transmission mode | |
| LED Link/Traffic | green: network connection yellow: flashes in rhythm with the transmitted data |
|
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 500 mA | |
| Power consumption | ≤ 10 W | |
| Surge protection | category 2 | |
| Interface 1 | ||
| Physical | Ethernet | |
| Protocol | HTTP (REST API) OPC UA (AutoID Companion Specification) EtherNet/IP PROFINET IO |
|
| Transfer rate | 10 MBit/s or 100 MBit/s | |
| Interface 2 | ||
| Physical | Ethernet | |
| Protocol | HTTP (REST API) OPC UA (AutoID Companion Specification) EtherNet/IP PROFINET IO |
|
| Transfer rate | 10 MBit/s or 100 MBit/s | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 18000-63 | |
| Ambient conditions | ||
| Classification | Environmental condition A (controlled environment) | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) (Operation with nontransmission periods, adjustable) -20 ... 50 °C (-4 ... 122 °F) (Continuous transmission mode) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | Power supply: M12 connector Protective earth: M4 earthing screw Ethernet: M12 plug connection |
|
| Material | ||
| Housing | PA 6.6 | |
| Base | diecast aluminum | |
| Mass | 820 g | |
| Dimensions | ||
| Height | 63 mm | |
| Width | 112 mm | |
| Length | 114 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IUT-F190-B40-2V1D-FR2-10
Function
The compact read/write device IUT-F190-B40-2VD1-* operates in the UHF frequency range and is optimized for industrial use over medium distances. The device writes and reads passive transponders according to EPC Gen2 (ISO/IEC 18000-63). The read/write device complies with the respective local radio regulations.
Extensive possibilities for data filtering are supported. The read/write device has an ethernet interface and is connected via an M12 connector. The user can monitor the status of the read/write device using the integrated LEDs.
The read/write device has a typical detection range of about 2 m, which is determined by the transponder used and can be adjusted by setting the transmission power. Further influencing factors are the mounting or installation for the specific application and the surrounding materials, especially metal. The separately specified read and write distances for the respective transponders have been determined in a test laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination read/write device and transponder must be tested in the desired application.
Informative Literature: IUT-F190-B40-2V1D-FR2-10
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Product Information - RFID UHF-F190 Portfolio | ENG | 856 KB | |
| Application Report - Clear Identification of Green Tires During Vulcanization | ENG | 320 KB | |
| Application Report - Fully Automatic Component Tracking for Prefabricated Home Production | ENG | 205 KB | |
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB | |
| Application Report - Safe Positioning for Working Platforms | ENG | 279 KB |
Product Documentation: IUT-F190-B40-2V1D-FR2-10
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual IUT-F190-B40-2V1D-* | ENG | 10841 KB |
Design / Simulation: IUT-F190-B40-2V1D-FR2-10
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 4300 KB |
Approvals: IUT-F190-B40-2V1D-FR2-10
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| ODVA Ethernet/IP | 12148.01 | ALL | 126 KB | |
| Declaration of Conformity | ||||
| Australia Declaration of Conformity | CERT-7147 | ALL | 294 KB | |
Software: IUT-F190-B40-2V1D-FR2-10
Associated Products: IUT-F190-B40-2V1D-FR2-10
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
In stock
Register for an introduction to RFID technology training session with our Product Manager. Sessions are one-on-one and last around an hour. All skill levels are welcome.
Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …
Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.