RFID read/write device IQT1-18GM-R4-V1
- Operating frequency 13.56 MHz
- Conforms to ISO 15693
- Suitable for FRAM transponder
- Read/write head with thread M18 x 1
- Connection via V1 (M12 x 1) plug connection
- Multihole-LED for function display
- Degree of protection IP67
- Connection via integrated RS-485 interface
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of IQT1-18GM-R4-V1
| Product Description |
|---|
| HF RFID read/write device, ISO 15693 |
| General specifications | ||
|---|---|---|
| Operating frequency | 13.56 MHz | |
| Transfer rate | 26 kBit/s | |
| Sensing range | ||
| Read distance | 0 ... 50 mm | |
| Write distance | 0 ... 50 mm | |
| Width | max. 45 mm | |
| UL File Number | E87056 | |
| MTBF | 375 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green/yellow | Multihole-LED: green: power on green flashing: read/write attempt performed yellow: data carrier detected |
|
| Electrical specifications | ||
| Rated operating voltage | 10 ... 30 V DC , ripple 10 %SS , limited power source (EN 60950) | |
| Power consumption | ≤ 1.2 W | |
| Interface | ||
| Physical | RS-485 point-to-point connection | |
| Protocol | ASCII | |
| Transfer rate | 1200, 2400, 4800, 9600, 19200, 38400 (default) Bit/s | |
| Cable length | ≤ 3 m | |
| Directive conformity | ||
| Radio equipment | ||
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PBT/stainless steel | |
| Encapsulation compound | CY 221/HY 2966 | |
| Installation | non-flush | |
| Distance between two heads | ≥ 80 mm |
|
| Mass | approx. 40 g | |
| Dimensions | ||
| Length | 66 mm | |
| Diameter | 18 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IQT1-18GM-R4-V1
Informative Literature: IQT1-18GM-R4-V1
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB |
Product Documentation: IQT1-18GM-R4-V1
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual IQT*-*-R4-V1 | ENG | 1673 KB |
Design / Simulation: IQT1-18GM-R4-V1
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 249 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: IQT1-18GM-R4-V1
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada, USA UL | CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0 | ALL | 561 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0566C | ALL | 109 KB | |
| Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung | ALL | 61 KB | ||
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7037 | ALL | 108 KB | |
Software: IQT1-18GM-R4-V1
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| Add-On Instructions for RSLogix/Studio 5000. Reading and writing of Parameters to IQT1 RFID Heads and Easy and Expert mode(Function Blocks) Add-On Instructions to read and write RFID data to a tag. / Inbetriebnahmedatei_a | 5/2023 | ZIP | 31797 KB |
Associated Products: IQT1-18GM-R4-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
In stock
Contact Us
Register for an introduction to RFID technology training session with our Product Manager. Sessions are one-on-one and last around an hour. All skill levels are welcome.
Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …
Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.