选择您所在的国家/地区
S1SD-1AI-1U.1 Isolating Amplifier
主要优势一览
- 1-channel signal conditioner
- 24 V DC supply
- Input current and voltage sources
- Current and voltage output
- Accuracy 0.1 %
- Configurable by DIP switches
- Connection via screw terminals
显示详情
注意
在转换前以倍加福有限公司或倍加福股份公司名义发布的所有产品文档（如证书、符合性声明等）也适用于倍加福欧洲公司。
DE
- DE
- EN
- ES
- FR
- PL
S1SD-1AI-1U.1 技术数据
| Signal type | Analog input | |
| Operation time | MTBF: 536 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F) |
| Connection | Power Bus or terminals 1-, 2+ | |
| Rated voltage | Ur | 16.8 ... 31.2 V DC |
| Power dissipation | 0.6 W | |
| Power consumption | 0.7 W |
| Connection side | field side | ||||||||||
| Transmission range | linearity range: -1 ... 110 % | ||||||||||
| Input I | |||||||||||
| |||||||||||
| Input II | |||||||||||
| |||||||||||
| Connection side | control side | |
| Connection | terminals 3-, 4+ | |
| Analog voltage output | 0/2 ... 10 V , load ≥ 2 kΩ | |
| Analog current output | 0/4 ... 20 mA, load ≤ 600 Ω | |
| Ripple | ≤ 10 mV eff |
| Accuracy | max. 0.1 % of full-scale value | |
| Influence of ambient temperature | < 100 ppm/K of full-scale value | |
| Frequency range | 0 ... 10 Hz , 0 ... 100 Hz , 0 ... 5 kHz | |
| Settling time | 70 ms , 7 ms , 150 µs |
| Output/power supply | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min | |
| Input/Other circuits | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Control elements | DIP switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | |||||
| |||||
| Degree of protection | IEC 60529:2001 | |
| Protection against electrical shock | EN 61010-1:2010 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection | IP20 | ||||||||||
| Connection | screw terminals | ||||||||||
| Core cross section | 0.5 ... 2.5 mm2 (20 ... 14 AWG) | ||||||||||
| Mass | approx. 70 g | ||||||||||
| Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1 | ||||||||||
| |||||||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||||||||
| Certificate | DEMKO 16 ATEX 1750X | ||||
| |||||
| Directive conformity | |||||
| |||||
II 3G Ex nA IIC T4 Gc| UL approval | E106378 | |||||||
| IECEx approval | ||||||||
| ||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |