Motor Starters Ex d IIB F7-DOL*
- Various power ratings available
- Coil voltage 415V
- Ex d and Ex tD certified
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Gas group IIB
- Aluminum enclosure
- Suitable for Ex d motors
- Degree of protection IP66
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of F7-DOL*
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 415 V | |
| Operating current | see PDF data sheet | |
| Terminal capacity | ||
| Main terminals capacity | 4 mm2 | |
| Main terminals torque | 1.7 Nm | |
| Grounding terminals capacity | M6 grounding bolt | |
| Contactor rating | see PDF data sheet | |
| Overload relay | see PDF data sheet | |
| Phases | 3 | |
| Function | direct online starter | |
| Switching diagram | see switching diagram overview | |
| Mechanical specifications | ||
| Thread type | metric ISO pitch 1.5 mm | |
| Enclosure range | F7 | |
| Enclosure cover | detachable , hinged | |
| Cover fixing | stainless steel socket cap head screws | |
| Screws | M6 | |
| Number | 8 | |
| Tightening torque | 3 Nm | |
| Material of screws | stainless steel | |
| Yield stress | min. 450 N/mm2 | |
| Cover seal | chloroprene | |
| Flamepath grease | Fluid film grade AR | |
| Degree of protection | IP66 | |
| Cable entry face A | ||
| M20 quantity | 2 | |
| M20 type | Stopping Plugs | |
| Cable entry face B | ||
| M20 quantity | 2 | |
| Material | ||
| Enclosure | aluminum alloy | |
| Finish | epoxy coated RAL 7032 | |
| Mass | approx. 5 kg | |
| Dimensions | ||
| External dimension (A) | 210 mm | |
| External dimension (B) | 210 mm | |
| External dimension (C) | 158 mm | |
| External dimension with operating element (C1) | 199 mm | |
| Mounting holes distance (G) | 187 mm | |
| Mounting holes distance (H) | 187 mm | |
| Mounting holes diameter (J) | 9 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | see datasheets of stopping plugs | |
| Mounting | see PDF data sheet | |
| Grounding | M6 external grounding points | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | SIRA 07 ATEX 1134 | |
| Marking |  II 2 GD Ex d IIB T* Ex tD A21 T6/T80 °C @ Ta +60 °C |
|
| Maximum power dissipation | 31 W | |
| International approvals | ||
| IECEx approval | IECEx TSA 07.0029 | |
| Conformity | ||
| Degree of protection | EN60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0102 | |
| General information | ||
| Ordering information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27370401 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
Details: F7-DOL*
Approvals: F7-DOL*
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Australia Sira II 2GD ATEX | SIRA 07ATEX1134 | ALL | 235 KB | |
| Test Safe IECEx Certificate of Conformity | IECEx TSA 07.0029 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-A036D | ALL | 160 KB | |
- Ask an Expert
- Cross Reference Request
- Check order status
- News
- Subscribe to Gate-Way, our Process Automation Division e-newsletter
- Service Level Agreements for ecom instruments
- Where to Buy our Products
- Browse Literature
- Technologies
- Control System Solutions
- Download Technical Documents
- Press Releases
- International Trade Shows
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.