ICA-16DI-G16-IO I/O hub

Panoramica dei principali vantaggi

IO-Link Class A
IO-Link 1.1.4
LED for switching state and fault indication
Configuration and control via IO-Link
Supply from IO-Link
16 digital inputs

Mostra di più

Connection Assignment: I/O hub ICA-16DI-G16-IO

Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

Scheda tecnica Funzione Classificazione Product Documentation Design / Simulation Certificazioni Software

Dati tecnici di ICA-16DI-G16-IO

I/O hub with IO-Link interface for 16 digital inputs

MTBF

172 a

LED PWR		LED green: flashing with short break (1 Hz) - IO-Link mode
LED IO		Switch state (IO); multicolor LED yellow: only IO pin 4 is active blue: only IO pin 2 is active green: both IO pin 4 and pin 2 are active red: overload at sensor supply or output

Operating voltage	U_B	18 ... 30 V DC, PELV Current limitation of the supply max. 4 A
No-load supply current	I₀	≤ 25 mA
Operating current	I_B	max. 4 A

Interface type		IO-Link
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D Firmware update
Process data		Inputs 3 Byte - Input signals 16 Bit - diagnosis signals 5 Bit
Vendor ID		1 (0x0001)
Device ID		985857 (0x0F0B01)
Data transfer rate		COM3 (230.4 kbits/s)
Min. cycle time		1 ms
SIO mode support		no
Compatible master port type		Class A

Number/Type		16 Inputs for 3-wire sensors (PNP), DC (IN1 ... IN16)
Supply		from IO-Link
Current loading capacity		180 mA , overload and short-circuit protected
Input current		≤ 5 mA (limited internally)
Switching point		Type 3 according to IEC 61131-2

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013
EN 55011:2016

Degree of protection		EN 60529:2000
Input		EN 61131-2:2007
Communication interface		IEC 61131-9 / IO-Link V1.1.4
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006

UL approval

Load specification DC General Use / DC Pilot Duty
Degree of protection not tested by UL; tested by Pepperl+Fuchs SE

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		85 % non-condensing
Climatic conditions		For indoor use only
Altitude		≤ 5000 m above MSL
Shock and impact resistance		30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks
Vibration resistance		0.35 mm / 5 g 5 ... 500 Hz
Pollution degree		3

Degree of protection

IP67 / IP68 / IP69k

Connection

IO-Link: M12 round plug connector in accordance with EN 61076-2-101, LM type (4-pin, connector contacts, screw-locking, A-coded)
Female connector: LF type or similar
IN: M8 round plug connector in accordance with EN 61076-2-104, LF type (4-pin, socket contacts, screw-locking, A-coded)
Mating connector: LM type or similar

Material

Housing

PBT

Mass

110 g

Tightening torque, cable gland

0.4 Nm (M12 connector),
0.2 Nm (M8 connector)

Dimensions

Height		29.35 mm
Width		30 mm
Length		143 mm

Mounting

screw mounting

Note generali

Novità e applicazioni correlate

Scopri di più sulle novità e applicazioni relative a questo prodotto.

IO-Link Infrastructure

Pepperl+Fuchs offers a range of IO-Link infrastructure that ist optimized for every application.

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Functional	These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.