Seleziona il tuo paese

Vai al sito web globale

  1. it-it
  2. Prodotti
  3. Hazardous Area Products and Solutions
  4. Barriere a sicurezza intrinseca
  5. K-System (DIN rail mounting)
  6. KFA6-ER-Ex1.W.LB

KFA6-ER-Ex1.W.LB Conductive Switch Amplifier

Panoramica dei principali vantaggi

  • 1-channel isolated barrier
  • 230 V AC supply
  • Level sensing input
  • Adjustable range 1 kΩ ... 150 kΩ
  • Relay contact output
  • Fault relay contact output
  • Adjustable time delay up to 10 s
  • Minimum/maximum control
  • Line fault detection (LFD)

Mostra di più

Contattaci per una stima esatta della fornitura.
Tipo preferito
Product photo: Conductive Switch Amplifier KFA6-ER-Ex1.W.LB
Product photo: Conductive Switch Amplifier KFA6-ER-Ex1.W.LB
Product Compliance: Europe – CE
Approval
Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

DE
  • DE
  • EN
  • ES
  • FR
  • PL
Scheda tecnicaFunzioneClassificazioneInformative LiteratureProduct DocumentationDesign / SimulationCertificazioniProdotto correlati

Dati tecnici di KFA6-ER-Ex1.W.LB

Signal typeDigital Input
Connectionterminals 14, 15
Rated voltageUr207 ... 253 V AC, 45 ... 65 Hz
Rated currentIr≤ 7 mA
Power consumption< 1.2 W
Connection sidefield side
Connectionterminals 1 (mass), 2 (min), 3 (max)
Control inputmin./max. control system: terminals 1, 2, 3
on/off control system: terminals 1, 3
Response sensitivity1 ... 150 kΩ , adjustable via potentiometer
Connection sidecontrol side
Connectionterminals 7, 8, 9; 10, 11, 12
Switching powermax. 192 W , 2000 VA
Outputsignal ; relay
Contact loading253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
Time constant for signal damping0.5 s, 2 s, 5 s, 10 s
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Display elementsLEDs
Control elementsDIP switch
potentiometer
Configurationvia DIP switches
via potentiometer
Labelingspace for labeling at the front
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Electromagnetic compatibilityNE 21:2006
Degree of protectionIEC 60529:2001
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Degree of protectionIP20
Connectionscrew terminals , max. 2.5 mm2
Massapprox. 150 g
Dimensions20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Height119 mm
Width20 mm
Depth115 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificateDMT 00 ATEX E 032
MarkingEx-Hexagon II (1)G [EEx ia] IIC [circuit(s) in zone 0/1/2]
Input[EEx ia] IIC
VoltageUo10 V
CurrentIo2.5 mA
PowerPo6 mW
Supply
Maximum safe voltageUm265 V AC (Attention! Um is no rated voltage.)
Output
Contact loading253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
Galvanic isolation
Input/Outputsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supplysafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013, EN 60079-11:2012
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Note generali
Chiedi a un esperto

Novità e applicazioni correlate

Scopri di più sulle novità e applicazioni relative a questo prodotto.

limit value detection for pharmaceutical vessels, Pepperl+Fuchs

Limit Value Detection for Pharmaceutical Vessel Applications

Controlling the dosing process for a novel pharmaceutical product involves specific considerations. The implementation occurred in a hazardous area, necessitating the regulation of wastewater levels within a designated vessel.
Ulteriori informazioni
Barriere isolate KCD2-SCS con AO e AI, Pepperl+Fuchs
Prodotti e soluzioni
13/06/2024

Controllo e monitoraggio dei posizionatori di valvole con un solo dispositivo

Pepperl+Fuchs ha ampliato la sua gamma di barriere isolate sistema K con le KCD2-SCS*: le prime barriere a sicurezza intrinseca AI/AO a 2 canali con doppia funzione per segnali di controllo di ingresso analogico o uscita analogica.
Ulteriori informazioni

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Privacy Policy

x

Contattaci!
 
Rispondiamo alle tue domande e dubbi sui nostri prodotti e applicazioni.


 
Chiedi all’Esperto