ML100-8-1000-RT/103/115 Diffuse mode sensor

Panoramica dei principali vantaggi

Miniature design
Easy to use
Very bright, highly visible light spot
Full metal thread mounting
Highly visible LEDs for Power ON and switching state
Not sensitive to ambient light

Mostra di più

Product photo: Diffuse mode sensor ML100-8-1000-RT/103/115

Dimensions: Diffuse mode sensor ML100-8-1000-RT/103/115

Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

Scheda tecnica Funzione Classificazione Product Documentation Design / Simulation Certificazioni Prodotto correlati

Dati tecnici di ML100-8-1000-RT/103/115

Diffuse mode sensor, plastic housing, 1000 mm adjustable detection range, red light, light/dark on, pnp output, fixed cable

Detection range		0 ... 1000 mm
Adjustment range		100 ... 1000 mm
Reference target		standard white, 100 mm x 100 mm
Light source		LED
Light type		modulated visible red light
Polarization filter		no
Diameter of the light spot		approx. 75 mm at a distance of 1000 mm
Opening angle		approx. 2 °
Optical face		frontal
Ambient light limit		EN 60947-5-2:2007+A1:2012

MTTF_d		860 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: power on
Function indicator		LED yellow, lights up with receiver lit
Control elements		sensitivity adjustment
Control elements		Light-on/dark-on changeover switch

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 20 mA

Switching type		The switching type of the sensor is adjustable. The default setting is: light-on
Signal output		1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	1000 Hz
Response time		0.5 ms

Product standard

EN 60947-5-2

UL approval		cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67

Connection

2 m fixed cable

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 50 g

Tightening torque, fastening screws

0.6 Nm

Dimensions

Height		31 mm
Width		11 mm
Depth		20 mm

Cable length

2 m

Note generali

Novità e applicazioni correlate

Scopri di più sulle novità e applicazioni relative a questo prodotto.

ML100 Diffuse Mode Sensors Detect Blue Solar Wafers

The reliable detection of solar wafers is one of the most demanding tasks for a photoelectric sensor. Read how the BlueBeam variant from the proven ML100 series ensures reliable recognition of solar wafers …

Ulteriori informazioni

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Functional	These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.