UC500-18GS-IUEP-IO-V15 Ultrasonic sensor

Panoramica dei principali vantaggi

IO-Link Interface for process data, parameterization and diagnosis
Programmable via DTM with PACTWARE
Programmable via IrDA (infrared interface)
Selectable sound lobe width
Synchronization options
Enhanced temperature compensation adjustable, stable measuring values already 2 min after switching on
Push-pull output
Analog output

Mostra di più

Product photo: Ultrasonic sensor UC500-18GS-IUEP-IO-V15

Dimensions: Ultrasonic sensor UC500-18GS-IUEP-IO-V15

Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

Scheda tecnica Funzione Classificazione Informative Literature Product Documentation Design / Simulation Certificazioni Software Prodotto correlati

Dati tecnici di UC500-18GS-IUEP-IO-V15

Single head system

Sensing range		30 ... 500 mm
Adjustment range		50 ... 500 mm
Dead band		0 ... 30 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 300 kHz
Response delay		minimum : 20 ms factory setting: 40 ms
Sensor cycle time		≥ 10 ms (factory setting) ; programmable to 60 s
Temperature influence		with temperature compensation: ≤ ± 0.75% of the end value 10 min after switching on the sensor (factory setting) with enhanced temperature compensation: ≤ ± 0.75% of the end value 2 min after switching on the sensor without temperature compensation: 0.17 %/K

Non-volatile memory		EEPROM
Write cycles		300000

LED green		solid: power on flashing: standby mode or IO-Link communication
LED yellow		solid: object in evaluation range flashing: switch point programming, object detected
LED red		solid: error flashing: switch point programming, object not detected

Operating voltage	U_B	10 ... 30 V DC , ripple 10 %_SS
No-load supply current	I₀	≤ 60 mA
Power consumption	P₀	≤ 1000 mW
Time delay before availability	t_v	≤ 300 ms

Interface type		IO-Link (via C/Q = Pin 4)
IO-Link revision		1.1
Device profile		Smart Sensor Profile 2
Process data width		32 bit
Device ID		0x300602 (3147266)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		3 ms
SIO mode support		yes
Compatible master port type		Class A Class B (use 3-pole adapter or 3-wire cable)

Interface type		IrDA (infrared interface)
Mode		point-to-point connection
Transfer rate		115.2 kBit/s
Maximum communication distance		5 cm

Input/output type

1 synchronization connection, bidirectional

0 Level		0 ... 1 V
1 Level		2.5 V ... U_B
Input impedance		> 22 kΩ
Output current		current source < 2.5 mA
Pulse length		≥ 1 ms with external control, low active

Synchronization frequency

Common mode operation		≤ 100 Hz
Multiplex operation		≤ 71 Hz / n , n = number of sensors , n ≤ 10

Output type		1 push-pull output , short-circuit protected , reverse polarity protected
Rated operating current	I_e	100 mA , short-circuit/overload protected
Switching frequency		factory setting: 14 Hz programmable to 33 Hz
Voltage drop		≤ 2.5 V
Repeat accuracy		≤ ± 0.1 % of full-scale value
Range hysteresis		1 % of the adjusted operating range (default settings), programmable , min. 1 mm
Off-state current		≤ 100 µA

Output type		1 analog output 0 (4) ... 20 mA or 1 analog output 0 ... 10 V
Resolution		current output: evaluation range [mm]/3200 but ≥ 0.35 mm voltage output: evaluation range [mm]/4000 but ≥ 0.35 mm
Deviation of the characteristic curve		≤ ± 1 % of full-scale value
Repeat accuracy		≤ ± 0.1 % of full-scale value
Load resistor		current output: ≤ 500 Ω voltage output: ≥ 1000 Ω

Standard conformity

Standards

EN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 60947-5-7:2003
IEC 60947-5-7:2003
IEC 61131-9:2013

UL approval		cULus Listed, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

Connector plug M12 x 1 , 5-pin

Degree of protection

IP67

Material

Housing		stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts
Transducer		epoxy resin/hollow glass sphere mixture; polyurethane foam

Installation position

any position

Mass

45 g

Tightening torque, fastening screws

max. 30 Nm

Dimensions

Length		90 mm
Diameter		18 mm

Output 1		near switch point: 50 mm far switch point: 500 mm Output mode: Window mode output behavior: NO contact
Output 2		near limit: 50 mm far limit: 500 mm Output mode: rising ramp output behavior: Current output 4 mA ... 20 mA
Beam width		wide

Note generali

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Functional	These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.