Multifunction Terminal MFT-*

Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies
Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches
Bus termination
Current limiting
DIN rail mounting
Maintenance without hot work permit
Wires can be disconnected during operation once the module has been removed
(parts under voltage remain covered)
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for MFT-*

Produktbeskrivelse
Multifunction terminal, allows maintenance work to be carried out in hazardous areas without a hot work permit

General specifications
Function		The specific device function can be found in the ordering information section.
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Electrical specifications
Resistor		1 x 1 Ω ... 22 MΩ, 0.5 W 2 x 1 Ω ... 22 MΩ, 0.5 W
Diode		1 x I max. 1 A 2 x I max. 0.5 A
Fuse		0.032 ... 1.5 A 1.5 ... 6.3 A Pre-arcing time/current characteristic: time-lag T
	Nominal voltage	max. 250 V AC max. 30 V DC
Relay
	Control	24 V , approx. 5 ... 8.5 mA
	Contact loading	AC max. 250 V , max. 1 A DC max. 30 V , max. 1 A
	Contact resistance	0.1 Ω at 6 V, 1 A
	Switching operations NO contact	3 x 10⁴
	Switching operations NC contact	1 x 10⁴
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-55 ... 55 °C (-67 ... 131 °F) (I_m = 1.5 ... 6.3 A) -55 ... 70 °C (-67 ... 158 °F) (I_m = 0.032 ... 1.5 A) The specific ambient temperature can be found in the ordering information section.
Mechanical specifications
Core cross section		0.5 ... 2.5 mm²
Degree of protection		IP20 , IP30 when plug-in module is plugged in
Mass		approx. 115 g , depending on model
Dimensions		93 x 17.5 x 79 mm (l x w x h)
	Height	79 mm
	Width	17.5 mm
	Length	93 mm
Tightening torque		0.5 ... 1 Nm
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 07 ATEX 1004 U
	Marking	II 2 G Ex d e IIC
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-1:2014 , EN 60079-7:2015+A1:2018
International approvals
IECEx approval
	IECEx certificate	IECEx BKI 08.0008U
	IECEx marking	Ex d e IIC Gb
Marine approval
	DNV GL Marine	TAA0000034
General information
Ordering information		Customer-specific values are available in the E96 series. Minimum order quantity 50 pieces.
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210192
ECLASS 12.0	27210192
ECLASS 11.0	27210192
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27242692
ETIM 9.0	EC003015
ETIM 8.0	EC003015
ETIM 7.0	EC003015
ETIM 6.0	EC003015
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: MFT-*

Function

The multifunction terminal allows maintenance without a hot work permit in a hazardous area.

It employs a 2-step removal process, which guarantees that a potentially formed ignition spark remains inside the flameproof enclosure when lifting off a module and thus makes sure that the ignition spark has extinguished and the module is volt-free.

Product Documentation: MFT-*

Safety and Security Documentation	Språk	Filtype	Filstørrelse
Instruction manual	ENG	PDF	166 KB
Functional Safety Manual	ENG	PDF	1993 KB
Manuals
Manual	ENG	PDF	2766 KB

Design / Simulation: MFT-*

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	2318 KB
CAE
EPLAN macros MFT / EPLAN-Makros MFT	ALL	ZIP	11723 KB

Approvals: MFT-*

Certificates	Sertifikatnummer	Språk	Filtype	Filstørrelse
BKI IECEx Certificate of Conformity	IECEx BKI 08.0008U	ALL	LINK	---
Brasil TUV Rheinland Brazil	TÜV 13.1133 U	ALL	PDF	1220 KB
Bureau Veritas (Maritime) Marine	22449/C0 BV	ALL	PDF	590 KB
DNV Marine	TAA0000034	ALL	PDF	110 KB
Europe PTB ATEX Category 2 G	PTB 07 ATEX 1004U	ALL	PDF	1206 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0746D	ALL	PDF	358 KB

Relaterte produkter: MFT-*

Matching System Components

	F.FB1.T14.**.1..*..*** FieldBarrier Junction Box
	FieldBarrier Junction Box, Brushed Stainless Steel, 8, 10, 12 outputs Ex ia, Brushed enclosure, IP66, Configurable cable entries for trunk and spurs, Packaged certified solution, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Device coupler location: Zone 2 - high-power trunk Zone 1 - high-power trunk, Device coupler location [2]: Zone 1 - high-power trunk, Instrument location / spur protection: Zone 0 ... 1 - intrinsic safety, Function: Device coupler, Design / Mounting: Outside installationpa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Snarveier

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.