Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
General specifications | ||
---|---|---|
Series | 7500 | |
Hazardous environment | gas or dust | |
Supply | ||
Rated voltage | 230 VAC ±10% 115 VAC ± 10% 24 VDC ±10% |
|
Power consumption | 230 VAC @ 1.8 W 115 VAC @ 9 W 24 VDC @ 9 W |
|
Pneumatic parameters | ||
Protective gas supply | instrument grade air or inert gas | |
Pressure requirement | T6 version: 0.2 bar (2.9 psi) to 4.0 bar (58 psi) T4 version: 0.2 bar (2.9 psi) to 16 bar (232 psi) |
|
Purge flow rate | Kv value water 3.8 m3/h | |
Connections | G1/2 (13 mm) | |
Ambient conditions | ||
Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) | |
Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
Mechanical specifications | ||
Connection type | Inlet/outlet size: G 1/2 (13 mm) Jet size: 3.0 mm and 4.5 mm size (included) |
|
Degree of protection | IP65 | |
Material | Body: brass Valve (intenal): brass Seal: NBR |
|
Data for application in connection with hazardous areas | ||
EU-type examination certificate | ||
Marking | II 2 G Ex mb IIC T4/T6 Gb II 2 D Ex mb IIIC T130 °C / T80 °C Db Protection by encapsulation EPS 18 ATEX 1232 X |
|
Certificate | CCC approvals | |
Marking | Ex mb IIC T4/T5/T6 Gb Ex mbD 21 T80°C/T95°C/T130°C |
|
Directive conformity | ||
Directive 2014/34/EU | EN IEC 60079-0:2018, EN IEC 60079-7:2015/A1:2018, EN 60079-18:2015/A1:2017, EN 60079-31:2014 | |
International approvals | ||
IECEx approval | IECEx EPS 18.0110X Ex mb IIC T4/T6 Gb Ex mb IIIC T130 °C/T80 °C Db |
System | Classcode |
---|---|
ECLASS 13.0 | 27180591 |
ECLASS 12.0 | 27180591 |
ECLASS 11.0 | 27180591 |
ECLASS 10.0.1 | 27291390 |
ECLASS 9.0 | 27291390 |
ECLASS 8.0 | 27291390 |
ECLASS 5.1 | 40050501 |
ETIM 9.0 | EC000243 |
ETIM 8.0 | EC000243 |
ETIM 7.0 | EC000243 |
ETIM 6.0 | EC000243 |
ETIM 5.0 | EC000243 |
UNSPSC 12.1 | 39121303 |
The 7500 series Type Z/Ex pz purge and pressurization system allows general purpose equipment to be mounted in enclosures and operate safely in Division 2, Zone 2, or Zone 22 hazardous areas. The 7500 digital valve is used to pressurize the enclosure by adjusting an internal needle valve for pressure; purging of the enclosure is accomplished via a two-way valve. The 7500 control unit is set up to work with and power up the 7500 digital valve. The digital valve is Ex rated for hazardous areas.
The 7500-MAN-BK-**-* digital valve works with the 7500 control unit and is ATEX and CCC certified for use in Zone 2 or Zone 22 applications.
Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
---|---|---|---|---|
/cert/certb150.pdf | EPS 18 ATEX 1232 X | ALL | 1906 KB | |
China SITIIAS CCC Ex Certificate | 2021322307003982 (Katy, TX USA) | ALL | 2905 KB | |
IECEx Certificate of Conformity | IECEx EPS 18.0110X | ALL | LINK | --- |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0G9 | ALL | 238 KB | |
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0H3 | ALL | 48 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0H1 | ALL | 163 KB |