Type Z Purge System

The Pepperl+Fuchs Bebco EPS Type Z purge and pressurization systems provide easy selection, installation, and operation for enclosures located in Division 2 / Zone 2 hazardous areas.  The Type Z solutions consist of a control unit, vent, and solenoid valves. The combination of automation and configurable functions support even the most difficult applications.

• Automatic systems for alarm, purging, and power to the enclosure
• Enclosure sizes to 450 cu. ft. 
• Conforms to NFPA 496 and ISA 12.4 standards 
• ATEX, IECEx, and UL certified systems
• Built-in programming (programmable temperature control / leakage compensation)

• 7500 Series Type Z Purge System

The 7500 series Type Z purge and pressurization system is a universally powered, globally certified system for Zone 2/22 and Division 2 hazardous areas.

• 5500 Series Type Z Purge System

The all-new 5500 series Type Z purge and pressurization system is the newest system from Pepperl+Fuchs that provides easy selection, installation, and operation for enclosures located in Division 2 / Zone 2 hazardous areas.

• 3000 Series Type Z Purge System

Our 3000 series Type Z purging system will purge and pressurize the protected enclosure and maintain pressure within the enclosure. Suitable for Class I, Division 2 to non-hazardous.

• 1000 Series Type Z Purge System

The 1000 series type Z purge system is suitable for Class I, Division 2 to non-hazardous area applications and Class II, Division 2 to non-hazardous area applications.

• Accessories for Type Z Purge System

Many of the Type Z purge system models require a vent. Learn more about accessories and vents for the Type Z purge system.