Type Z & Ex pzc purge and pressurization system 7500-01-AA-STD-UNV-PNO
- Global third-party approvals for Class I, II, Div. 2 and Zone 2/22
- Must be used in conjunction with an EPV-7500-* vent
- Low cost, compact design, easy to use
- Universal power: AC or DC
- Touch screen display with LEDs for easy visual indication
- Easy setup with pre-set purge programs for your application
- Automatic pressure compensation with digital manifold
- Rugged, corrosion-resistant housing
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for 7500-01-AA-STD-UNV-PNO
| Produktbeskrivelse |
|---|
| 7500 series type Z & Ex pzc purge and pressurization control unit |
| General specifications | ||
|---|---|---|
| Equipment architecture | max. enclosure size 12.7 m3 (450 ft3) For complete technical data, see the 7500 Control Unit and 7500-MAN-MV-01 datasheets |
|
| Operating mode | fully automatic (FA) | |
| Series | 7500 | |
| System | Type Z Purge ; Ex pzc Purge | |
| Hazardous environment | gas or dust | |
| Supply | ||
| Rated voltage | 20 ... 30 V DC at 0.1 A 90 ... 250 V AC , 50 ... 60 Hz at 0.04 A without solenoid valve Supply voltage can be line-to-line or line-to-neutral, single phase OVC II |
|
| Power consumption | max. 2.7 W / 7.3 VA without valve | |
| Electrical specifications | ||
| Connection | screw terminals -- see manual for specifications on wire size and torque values | |
| Output | ||
| Output I | ||
| Connection | K1, terminals, 1 x NO | |
| Output type | enclosure power contacts | |
| Contact loading | 5 A at 250 V AC , 5 A at 30 V DC, relays must be externally fused inrush current: 50 A | |
| Output II | ||
| Connection | K2, terminals, 1 x NO | |
| Output type | alarm and control contacts | |
| Contact loading | 5 A at 250 V AC , 5 A at 30 V DC, relays must be externally fused inrush current: 50 A | |
| Output III | ||
| Connection | SV1, terminals, L1 powered contact | |
| Output type | solenoid manifold, contact | |
| Contact loading | 0.5 A at 250 V AC , 0.5 A | |
| Indicators/settings | ||
| LED indication | K1: Green - Contact K1 is energized (enclosure contacts) K2: Amber - Contact K2 is energized (alarm/control contacts) P/SV: Blue - Safe pressure P1 (minimum enclosure pressure) P/SV: Amber - Solenoid manifold is energized (purging/pressure compensation) |
|
| Pneumatic parameters | ||
| Protective gas supply | compressed air or inert gas, 40 µm filter, free from oil | |
| Pressure requirement | supply pressure: 1.4 ... 8.2 bar (20 ... 120 psig) | |
| Safe pressure | For model 7500-01*: P1 for gas: 0.12 inch w.c. (0.30 mbar) P1 for dust: 0.52 inch w.c. (1.29 mbar) P2: 0.8 inch w.c. (1.99 mbar) P3: 2.5 inch w.c. (6.22 mbar) P4: 4.5 inch w.c. (11.2 mbar) pressure sensing : -0.31 / +0 mbar (-0.125 / +0 in wc) For model 7500-03*: P1 for gas: 0.23 inch w.c. (0.57 mbar) P1 for dust: 0.63 inch w.c. (1.57 mbar) P2: 0.8 inch w.c. (1.99 mbar) P3: 2.5 inch w.c. (6.22 mbar) P4: 4.5 inch w.c. (11.2 mbar) pressure sensing: -0.43 / +0 mbar (0.175 / +0 in wc) |
|
| Enclosure pressure | For model 7500-01*: 0 ... 12.9 mbar (0 ... 5 in wc) For model 7500-03*: 0 ... 25.8 mbar (0 ... 10 in wc) |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Conformity | ||
| Electromagnetic compatibility | EN 61326-3-2:2008, EN 61000-6-2:2005 | |
| Emitted interference | FCC CFR 47, part 15, subpart B: 2017 , ICES-003, Issue 6:2016, Class A ITE | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 50 °C (-40 ... 122 °F) at T6 -40 ... 65 °C (-40 ... 149 °F) at T5 -40 ... 70 °C (-40 ... 158 °F) at T4 |
|
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Relative humidity | 5 ... 90 %, non-condensing | |
| Altitude | max. 2000 m | |
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes | |
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Connection type | electrical: 2 x 1/2 inch NPTF (open from factory) 1 x M12 opening (plugged from factory) pneumatic: high-pressure port - 1/8 in NPTF, low-pressure port - 1/8 in NPTF |
|
| Degree of protection | Type 4X , IP66 | |
| Material | Lens: Makrolon® GP-V polycarbonate Screws: AISI 316 (1.4401), 304, or 18-8 stainless steel Housing: A380, A356, or 6061-T6 aluminum Mounting gasket: Bisco® HT-800 medium cellular silicone Mounting tabs: SAE 304 stainless steel M12 plug: 6061-T6 aluminum |
|
| Mass | 710 g (1 lb 10 oz) | |
| Dimensions | 150 x 100 x 50 mm (5.9 x 4 x 2 in) | |
| Data for application in connection with hazardous areas | ||
| Certificate | ||
| Marking |  II 3 G Ex ec mc nC [pzc Gc] IIC T6...T4 Gc II 3 D Ex mc tc [pzc Dc] IIIC T60 °C ... T80 °C Dc |
|
| Directive conformity | ||
| Directive 2014/34/EU | IEC/EN 60079-0 , IEC/EN 60079-2 , IEC/EN 60079-7 , IEC/EN 60079-15 , IEC/EN 60079-18 , IEC/EN 60079-31 Supplements: EN 61010-1:2010 |
|
| International approvals | ||
| UL approval | ||
| cULus | Class I, Division 2, Groups A, B, C, D T6 ... T4 Class II, Division 2, Groups F, G T6 ... T4 |
|
| IECEx approval | Ex ec mc nC [pzc Gc] IIC T6...T4 Gc Ex mc tc [pzc Dc] IIIC T60 °C ... T80 °C Dc |
|
| General information | ||
| Supplementary information | Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180508 |
| ECLASS 12.0 | 27180508 |
| ECLASS 11.0 | 27180508 |
| ECLASS 10.0.1 | 27180508 |
| ECLASS 9.0 | 27180508 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121301 |
Details: 7500-01-AA-STD-UNV-PNO
Function
The 7500 series purge and pressurization system consists of a control unit, an enclosure protection vent, and a manual or automatic manifold. The control unit’s menu-driven touch screen display makes it easy to select pre-programmed and user-selected variables. The display has 4 LED indicators that allow users to determine system condition from a distance.
A digital manifold system such as the 5500-MAN-... can be used to make the 7500 a fully automatic system. Enclosure pressure and leakage are monitored. If a loss in enclosure pressure occurs, the solenoid valve engages to restore the defined pressure settings and/or trigger a pressure drop alarm.
The 7500 series system has NEC, CE Code, ATEX, CCC, and IECEx third-party certifications for Class I, II/Div. 2 Type Z and Zone 2/22 Ex Ppc.
Informative Literature: 7500-01-AA-STD-UNV-PNO
| Literature | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Product Information - Pepperl+Fuchs Bebco EPS® 7500 Series Type Z/Ex pzc Purge and Pressurization System | ENG | 682 KB |
Product Documentation: 7500-01-AA-STD-UNV-PNO
| Technical White Papers | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Technical white paper: Choosing a Purge and Pressurization System | ENG | 3352 KB | |
| Technical white paper: Prevent Dust Explosions with Pressurization | ENG | 2459 KB | |
| Product information | |||
| Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
| Brief Instructions | |||
| Programming Quick Guide | ENG | 228 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 166 KB | |
| Manuals | |||
| Manual | ENG | 5689 KB | |
Design / Simulation: 7500-01-AA-STD-UNV-PNO
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 2-D / CAD 2-D | ALL | ZIP | 1622 KB |
| CAD 3-D / CAD 3-D | ALL | STP | 10197 KB |
Approvals: 7500-01-AA-STD-UNV-PNO
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| ATEX Certificate | DEMKO 18 ATEX 2025X | ALL | 551 KB | |
| Brasil TUV Rheinland Brazil | TÜV 22.1423X | ALL | 1303 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304002487 (Katy, TX USA) | ALL | 1368 KB | |
| IECEx Certificate of Conformity | IECEx UL 18.0022X | ALL | LINK | --- |
| Korea KOSHA | 18-AV4BO-0462X | ALL | 504 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7, RFPZ, RFPZ7) | ALL | 349 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0C4C | ALL | 171 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F8 | ALL | 167 KB | |
Relaterte produkter: 7500-01-AA-STD-UNV-PNO
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
© 2024 Med enerett.
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.