Thru-beam sensor ML29-P/59/102/143-Y807709
- Miniature design
- Ideal for installation in door profiles or frames
- Dark-On switching
- Supplied with connection cable
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for ML29-P/59/102/143-Y807709
| Produktbeskrivelse |
|---|
| Thru-beam sensor |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 1.5 m | |
| Threshold detection range | 2.5 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 880 nm | |
| Opening angle | emitter +/- 3 ° | |
| Optical face | lateral | |
| Ambient light limit | 40000 Lux | |
| Indicators/operating means | ||
| Function indicator | LED red in receiver : lights up when receiving the light beam | |
| Electrical specifications | ||
| Operating voltage | 11 ... 30 V DC | |
| No-load supply current | Emitter: ≤ 20 mA Receiver: ≤ 10 mA |
|
| Input | ||
| Test input | emitter deactivation at +UB ≤ 5 V DC | |
| Output | ||
| Switching type | dark-on | |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 0.1 A | |
| Switching frequency | 100 Hz | |
| Response time | 5 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 61000-6-2, EN 61000-6-3 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin plastic connector, 6.5 mm diameter | |
| Material | ||
| Housing | PMMA , black | |
| Optical face | Plastic pane | |
| Mass | per device 120 g | |
| Dimensions | ||
| Height | 85.2 mm | |
| Width | 11.6 mm | |
| Depth | 9.2 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: ML29-P/59/102/143-Y807709
Function
The narrow miniature thru-beam sensors are a small and cost-effective solution, fitting in virtually any door frame. The ML29 and ML30 series offer fast, reliable detection at a distance of up to 8.5 m. The sensors are easy to mount on the profile, either using adhesive strips or a screw. A large opening angle ensures problem-free alignment. Several sensors can be mounted in a cross formation to offer multi-beam protection.
Informative Literature: ML29-P/59/102/143-Y807709
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: ML29-P/59/102/143-Y807709
| Brief Instructions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 141 KB |
Design / Simulation: ML29-P/59/102/143-Y807709
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| 3-D model emitter / 3-D-Modell Sender | ALL | STP | 73 KB |
| CAD 3-D additional / CAD 3-D additional | ALL | STP | 73 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: ML29-P/59/102/143-Y807709
| Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2230D | ALL | 229 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6934 | ALL | 225 KB |
Relaterte produkter: ML29-P/59/102/143-Y807709
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
For første gang er en konsekvent løsningsserie med fotoelektriske funksjonsprinsipper og innovative teknologier tilgjengelig i identiske kapslinger. Brukere drar fordel av et uniformt driftskonsept over hele porteføljen. Oppdag seriene R100, R101, R103, R200 og R201 ...
Uansett om det er glass, silisiumskiver eller kretskort: Fotocellene i ML100-serien er spesiallaget for å oppfylle kravene til komplekse registreringsoppgaver. Lær mer om porteføljen ...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.