Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
WCS3B-LS221H-OR
| Ürün Açıklaması |
| Read head, RS-485 interface, with RS-485 terminal resistor |
| General specifications |
| Passage speed | ≤ 12.5 m/s |
| Measuring length | max. 314.5 m |
| Free tolerances to code rail | horizontal: 28 mm ( ± 14 mm )
vertical: 25.5 mm ( +11.5 mm/-14 mm ) |
| Resolution | ± 0.4 mm (1,250 positions/m) |
| Functional safety related parameters |
| MTTFd | 60 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green: power on |
| Data flow indicator | LED yellow: data communication active |
| Error indicator | LED red
flashing: read head outside of code rail
solid on: internal diagnostic test failed |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Power consumption | 11 VA at 24 V DC |
| Interface |
| Interface type | RS 485 interface |
| Data output code | binary code |
| Protocol | 1 , 2 |
| Transfer rate | 62.5 kBit/s |
| Address | 0 |
| Termination | with RS 485 termination |
| Standard conformity |
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles |
| Approvals and certificates |
| CSA approval | cCSAus Certified, General Purpose
Class 2 power source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Operating temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | 5-pin, M12 x 1 connector |
| Degree of protection | IP67 / IP69 |
| Material | |
| Housing | PET , PC (Polycarbonate) |
| Mass | 1000 g |
| Note | The reader must not be operated without the protective housing! |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details:
WCS3B-LS221H-OR
Product Documentation:
WCS3B-LS221H-OR
Design / Simulation:
WCS3B-LS221H-OR
Approvals:
WCS3B-LS221H-OR
İlişkili Ürünler:
WCS3B-LS221H-OR
| Accessory of |
|
|
|
| WCS3 guiding trolley for the WCS3B read head with protective enclosure, outdoor use, Ensures the optimum alignment of reading head and code rail, Plastic rollersfa |
|
| Accessories |
|
|
|
| Stopping plugs For WCS32B-OP* housing, Accessory WCS3Bfa |
|
|
|
|
| Outdoor protective cover for WCS3B reader, Accessory WCS3Bfa |
|
|
|
|
| Outdoor protective housing for reader WCS3B, Accessory WCS3B, Selectable connector position: left, middle, right, SSI interface, RS-485 interface, CANopen interfacefa |
|
+90 216 577 2250