Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
VDM18-300/32/105/122
| Ürün Açıklaması |
| Universal distance sensor, measurement to object, 300 mm detection range, red laser light, laser class 2, PNP output, analog output, control input, M12 plug |
| General specifications |
| Measuring range | 80 ... 300 mm |
| Light source | laser diode
typ. service life 50,000 h at Ta = +40 °C |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 2 |
| Wave length | 650 nm |
| Light spot representation | approx. 2 mm x 4.5 mm at 300 mm |
| Measuring method | Laser triangulation |
| Ambient light limit | ≤ 5000 Lux |
| Nominal ratings |
| Linearity error | 0.25 % of the measuring range |
| Repeat accuracy | < 0.25 % of the measured value |
| Resolution | < 0.1 % of the measuring range |
| Temperature drift | < 0.02 % / °C |
| Indicators/operating means |
| Operation indicator | LED green |
| Function indicator | 2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) |
| Parameterization indicator | LED red |
| Electrical specifications |
| Operating voltage | 18 ... 30 V DC |
| No-load supply current | ≤ 40 mA at 24 V DC |
| Protection class | II , rated voltage ≤ 50 V DC |
| Time delay before availability | ≤ 300 ms |
| Input |
| Control input | Laser off (HIGH +UB) Keypad lock (LOW 0 V) |
| Output |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching current | max. 100 mA |
| Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm |
| Switching frequency | ≤ 1 kHz |
| Response time | 0.4 ms |
| Compliance with standards and directives |
| Directive conformity | |
| EMC Directive 2004/108/EC | EN 60947-5-2 |
| Standard conformity | |
| Laser class | DIN EN 60825-1:2008, IEC 60825-1:2007 |
| Approvals and certificates |
| UL approval | cULus Listed |
| Ambient conditions |
| Ambient temperature | -10 ... 60 °C (14 ... 140 °F) |
| Storage temperature | -20 ... 80 °C (-4 ... 176 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 5-pin, M12 x 1 plastic connector |
| Material | |
| Housing | ABS , impact resistant |
| Optical face | PMMA |
| Mass | approx. 43 g |
| Dimensions | |
| Height | 50 mm |
| Width | 17 mm |
| Depth | 50 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details:
VDM18-300/32/105/122
Product Documentation:
VDM18-300/32/105/122
Design / Simulation:
VDM18-300/32/105/122
Approvals:
VDM18-300/32/105/122
İlişkili Ürünler:
VDM18-300/32/105/122
| Accessories |
|
|
|
| Mounting accessory, distance measuring devices Series VDM18fa |
|
|
|
|
| Mounting accessory, distance measuring devices Series VDM18fa |
|
+90 216 577 2250