Niedostępne do zakupu

Switch Amplifier KFD2-SOT2-Ex1.N

1-channel isolated barrier
24 V DC supply (Power Rail)
Dry contact or NAMUR inputs
Passive transistor output (resistive acc. to EN 60947-5-6)
Line fault transparency (LFT)
Reversible mode of operation
Up to SIL 2 acc. to IEC 61508

Technical Data
Product Documentation
Design / Simulation
Approvals

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:

Dane techniczne KFD2-SOT2-Ex1.N

General specifications
Signal type		Digital Input
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		20 ... 30 V DC
Ripple		≤ 10 %
Rated current		≤ 50 mA
Input
Connection		terminals 1+, 2+, 3-
Rated values		acc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Open circuit voltage/short-circuit current		approx. 8 V DC / approx. 8 mA
Switching point/switching hysteresis		1.2 ... 2.1 mA / approx. 0.2 mA
Line fault detection		breakage I ≤ 0.1 mA , short-circuit I > 6 mA
Output
Connection		terminals 7+, 9-
Rated voltage		typ. 8 V max. 20 V DC
Output		signal, passive electronic output
Impedance		1-signal: 1.6 kΩ ± 5 % 0-signal: 12 kΩ ± 5 %
Fault signal		< 10 µA
Collective error message		Power Rail
Transfer characteristics
Switching frequency		≤ 5 kHz
Galvanic isolation
Input/Output		reinforced insulation acc. to IEC 62103, rated insulation voltage 300 V_rms
Input/power supply		reinforced insulation acc. to IEC 62103, rated insulation voltage 300 V_rms
Output/power supply		basic insulation according to IEC 62103, rated insulation voltage 50 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Galvanic isolation		IEC 62103:2003
Electromagnetic compatibility		NE 21:2004
Degree of protection		IEC 60529:2001
Input		EN 60947-5-6:2000
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
	Height	119 mm
	Width	20 mm
	Length	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 00 ATEX 2035
	Marking	II (1) G [Ex ia] IIC II (1) D [Ex ia] IIIC
	Input	Ex ia IIC, Ex ia IIIC
	Voltage	10.5 V
	Current	13 mA
	Power	34 mW (linear characteristic)
Supply
	Maximum safe voltage	40 V DC (Attention! The rated voltage can be lower.)
Output
	Maximum safe voltage	40 V DC (Attention! The rated voltage can be lower.)
EU-type examination certificate		DMT 01 ATEX E 133
	Marking	I (M1) [Ex ia] I
Certificate		PF 11 CERT 1046 X
	Marking	II 3G Ex nA IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 50303:2000
International approvals
FM approval
	Control drawing	116-0035
CSA approval
	Control drawing	116-0047
IECEx approval		IECEx PTB 05.0011
	Approved for	[Ex ia] IIC , [Ex ia] I , [Ex ia] IIIC
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD2-SOT2-Ex1.N

Product Documentation: KFD2-SOT2-Ex1.N

Safety and Security Documentation	Język	Typ pliku	Rozmiar pliku
Instrukcja obsługi	POL	PDF	72 KB
Manual	ENG	PDF	377 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-SOT2-Ex1.N

CAD	Język	Typ pliku	Rozmiar pliku
CAD 3-D / CAD 3-D	ALL	STP	2510 KB
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	66 KB

Approvals: KFD2-SOT2-Ex1.N

Certificates	Nr. certyfikatu	Język	Typ pliku	Rozmiar pliku
Europe DEKRA EXAM ATEX Category (M1)	DMT 01 ATEX E 133	ALL	PDF	1310 KB
Europe PTB ATEX Category (1) GD	PTB 00 ATEX 2035	ALL	PDF	947 KB
Korea KOSHA	14-AV4BO-0163	ALL	PDF	270 KB
PTB Group II Group I IECEx Certificate of Conformity	IECEx PTB 05.0011	ALL	LINK	---
USA FM	CoC 3002773	ALL	PDF	202 KB
exida Functional Safety Assessment	P+F 01/09-02D R002	ALL	PDF	154 KB
Control Drawings
Control drawing CSA / Control drawing CSA		ALL	PDF	159 KB

Uwagi ogólne dotyczące informacji o produktach firmy Pepperl+Fuchs

Idź do

Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
phone +48 22 256 9770

Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.