Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne
CBN10-F46-E2-0,4M-V3
| General specifications |
| Switching function | Normally open (NO) |
| Output type | PNP |
| Rated operating distance | 10 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 7 mm |
| Output type | 3-wire |
| Nominal ratings |
| Installation conditions | |
| B | 5 mm |
| C | 20 mm |
| F | 20 mm / 50 mm |
| Operating voltage | 10 ... 30 V DC |
| Switching frequency | 0 ... 5 Hz |
| Hysteresis | 1 ... 10 % typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V |
| Voltage drop at IL | |
| Voltage drop IL = 10 mA, switching element on | 0.8 ... 2.2 V typ. 1.4 V |
| Operating current | 0 ... 100 mA |
| Lowest operating current | 0 mA |
| Off-state current | 0 ... 0.5 mA typ. 0.01 mA |
| Off-state current TU =40 °C, switching element off | ≤ 100 µA |
| No-load supply current | ≤ 15 mA |
| Time delay before availability | ≤ 50 ms |
| Switching state indicator | LED, yellow |
| Functional safety related parameters |
| MTTFd | 1210 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2 |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | fixed cable with plug |
| Housing material | PBT |
| Sensing face | PBT |
| Degree of protection | IP67 |
| Connector | |
| Tightening torque | 0.4 Nm |
| Number of pins | 3 |
| Cable | |
| Cable diameter | 3.5 mm ± 0.2 mm |
| Bending radius | > 10 x cable diameter |
| Material | PVC |
| Color | grey |
| Number of cores | 3 |
| Core cross section | 0.14 mm2 |
| Length | 0.4 m |
| Mass | 25 g |
| Dimensions | |
| Height | 5 mm |
| Width | 50 mm |
| Length | 25 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274201 |
| ECLASS 12.0 | 27274201 |
| ECLASS 11.0 | 27270102 |
| ECLASS 10.0.1 | 27270102 |
| ECLASS 9.0 | 27270102 |
| ECLASS 8.0 | 27270102 |
| ECLASS 5.1 | 27270102 |
| ETIM 9.0 | EC002715 |
| ETIM 8.0 | EC002715 |
| ETIM 7.0 | EC002715 |
| ETIM 6.0 | EC002715 |
| ETIM 5.0 | EC002715 |
| UNSPSC 12.1 | 39121550 |
Details:
CBN10-F46-E2-0,4M-V3
Design / Simulation:
CBN10-F46-E2-0,4M-V3
Approvals:
CBN10-F46-E2-0,4M-V3
Produkty powiązane:
CBN10-F46-E2-0,4M-V3
| Accessories |
|
|
|
| torque screwdriver (0.4 Nm)fa |
|
|
|
|
| plug-in cap for M8fa |
|
+48 22 256 9770