Wsparcie Czujników Przemysłowych
Wsparcie Ochrony przed wybuchem
Automatyzacja Produkcji

USi-industry evaluation unit USIS-F264-4E5-V19

USIS-F264-4E5-V19
  • Evaluation unit for ultrasonic transducers with eliptic sound field
  • Object detection in the near range
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Adjustable sound cone
  • Temperature compensation
  • Parameterizable input, e.g. for switching between two parameter sets

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:


Dane techniczne  USIS-F264-4E5-V19

Opis produktu
Evaluation unit for the ultrasonic sensor system USi-industry with switching outputs (stand-alone device/secondary device)
General specifications
TypeUSi-industry evaluation unit
Sensing range10 ... 2500 mm
factory setting: 2000 mm
Adjustment range150 ... 2500 mm
Dead band0 ... 10 mm
Object sizetyp. ∅ 10 mm
Transducer frequencyapprox. 103 kHz
Response delay10 ... 20000 ms
factory setting: 150 ms
Sensor cycle time10 ... 200 ms
factory setting: 50 ms
Resolution1 mm
Target velocityaxial (max.): typ. 2 m/s (up to 2.5 m/s)
Repeat accuracy± 0.1 % of full-scale value
Temperature influenceautomatic or manual temperature compensation available ,
without temperature compensation: 0.17 %/K
Indicators/operating means
LED greensupply voltage/device status
LED yellowoutput states
ButtonTeach-in
Electrical specifications
Operating voltage9 ... 30 V DC
No-load supply current≤ 160 mA
Power consumption< 2.5 W
Time delay before availability≤ 300 ms
Interface
Interface typeUSB 2.0
Inputs
Input type2 inputs for ultrasonic transducers
1 digital input
Output 1
DesignationOUT 1.1
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 2
DesignationOUT 1.2
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 3
DesignationOUT 2.1
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 4
DesignationOUT 2.2
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 55011:2016-04

Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 70 °C (-22 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug
Degree of protectionIP65
Connectionfor power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m
for ultrasonic transducer: for each socket M8, 3-pin
for parameterization: socket Mini USB
Material
Housingdiecast aluminum
Mass250 g
Dimensions
Height35 mm
Width77 mm
Length98 mm

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: USIS-F264-4E5-V19

Function

The USi-industry ultrasonic sensor system is used in applications for object detection, area monitoring and distance measurement, for example on machines and systems. It is also used as an assistance system on mobile machines such as robots and driverless transport systems (AGVs) for collision avoidance both indoors and outdoors. The evaluation unit and the ultrasonic transducers to be connected to it are separate units. This enables a high degree of flexibility and a wide range of applications, so that even the smallest installation spaces can be used for ultrasonic sensor technology.

Up to 2 ultrasonic transducers with an elliptical sound field can be connected to the evaluation unit and freely positioned. Each ultrasonic transducer is assigned 2 outputs. The evaluation unit has a total of 4 outputs as well as 1 digital input and 1 synchronization line, all of which can be parameterized individually and independently of each other and integrated into a wide variety of applications. All types of USi-industry evaluation units are delivered as stand-alone devices and are therefore equivalent, regardless of whether they are main devices or secondary devices. Even without an electrical connection, several individual devices can be operated together without interference by means of special parameterization.

The digital input can be defined for one of the following functions, either

  • to switch off the outputs or

  • to switch to another parameter set without interruption or

  • for teaching in a changing environment during operation.

The teach-in button can be used to

  • teach in the environment of the detection area,

  • set the switching points,

  • log the second ultrasonic transducer on or off and

  • reset the evaluation unit to the factory settings.

Complete parameterization is conveniently carried out using the Device Type Manager (DTM) under PACTware via the integrated USB interface. These parameters define the inputs and outputs, switching points and operating modes, sensor and ultrasound-specific values as well as synchronization options and temperature compensation. as well as synchronization options and temperature compensation.

Informative Literature: USIS-F264-4E5-V19

Language Selection:
LiteratureJęzykTyp plikuRozmiar pliku
Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safetyENGPDF1781 KB
Application ReportENGPDF347 KB
Application ReportENGPDF333 KB

Product Documentation: USIS-F264-4E5-V19

Language Selection:
ManualsJęzykTyp plikuRozmiar pliku
Manual USi-industry USI*-F264-*-V19ENGPDF2461 KB

Approvals: USIS-F264-4E5-V19

Language Selection:
CertificatesNr. certyfikatuJęzykTyp plikuRozmiar pliku
Canada USA UL Ordinary LocationE87056, Vol.1, Sec.65ALLPDF285 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)DOC-7654ALLPDF69 KB
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F)DOC-7655ALLPDF67 KB

Software: USIS-F264-4E5-V19

Language Selection:
Device Description Files/DriversInformacja o wersjiTyp plikuRozmiar pliku
DTM for USI*-F264-* / DTM für USI*-F264-*V1.0.0.3 / 2024-10-08ZIP22284 KB
Software Tools
PACTware 6.X / PACTware 6.X6.1ZIP335938 KB

Produkty powiązane: USIS-F264-4E5-V19

Matching System Components

Ultrasonic transducer with 1.5 m cable, exclusively for the USi ultrasonic sensor systems , Extremely compact dimensions, Elliptic sound cone, 1.5 m cable lengthfa
Ultrasonic transducer with 3 m cable, exclusively for the USi ultrasonic sensor systems , Extremely compact dimensions, Elliptic sound cone, 3 m cable lengthfa
Horizontal mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Vertical mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Horizontal mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Vertical mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Accessories
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Adapter cable USB-A plug straight to Mini-USB-B plug straight 4-pin, PVC cable black, shieldedfa
Uwagi ogólne dotyczące informacji o produktach firmy Pepperl+Fuchs
System czujników USi-safety

System czujników ultradźwiękowych USi-safety stanowi przełom w zastosowaniach związanych z bezpieczeństwem. Czujniki można stosować zarówno w trudnych warunkach, w zapylonym środowisku, jak i na zewnątrz.

Firma Pepperl+Fuchs oferuje różne dokumenty do pobrania zawierające informacje na temat czujników ultradźwiękowych.

Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
phone +48 22 256 9770

© 2024 Wszelkie prawa zastrzeżone

Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.