Ultrasonic sensor UC1000-30GM-IUR2-K-V15

Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
Analog current and voltage output
Synchronization options
Adjustable acoustic power and sensitivity
Temperature compensation

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Produkty powiązane

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:

Dane techniczne UC1000-30GM-IUR2-K-V15

Opis produktu
Single head system

General specifications
Sensing range		80 ... 1000 mm
Adjustment range		120 ... 1000 mm
Dead band		0 ... 80 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 180 kHz
Response delay		65 ms minimum 195 ms factory setting
Indicators/operating means
LED green		solid: Power-on flashing: Standby mode or program function object detected
LED yellow 1		solid: object in evaluation range flashing: program function
LED yellow 2		solid: object in detection range flashing: program function
LED red		solid: temperature/program plug not connected flashing: fault or program function object not detected
Temperature/teach-in connector		Temperature compensation , Evaluation range programming , output function setting
Electrical specifications
Operating voltage		10 ... 30 V DC , ripple 10 %_SS
Power consumption		≤ 900 mW
Time delay before availability		≤ 500 ms
Interface
Interface type		RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
Input/Output
Synchronization		bi-directional 0 level -U_B...+1 V 1 level: +4 V...+U_B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
	Common mode operation	max. 30 Hz
	Multiplex operation	≤ 30 Hz / n , n = number of sensors , n ≤ 5
Output
Output type		1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V
Resolution		evaluation range [mm]/4000, but ≥ 0.35 mm
Deviation of the characteristic curve		≤ 0.2 % of full-scale value
Repeat accuracy		≤ 0.1 % of full-scale value
Load impedance		current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm
Temperature influence		≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation)
Compliance with standards and directives
Standard conformity
	Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 5-pin
Degree of protection		sensor head: IP67 connector sensor head/controller unit: IP52
Material
	Housing	stainless steel (1.4305 / AISI 303) PBT plastic parts
	Transducer	epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass		260 g
Dimensions
	Length	27 mm
	Diameter	30 mm
Factory settings
Output		evaluation limit A1: 200 mm evaluation limit A2: 1000 mm rising ramp

Classifications

System	Classcode
ECLASS 13.0	27272803
ECLASS 12.0	27272803
ECLASS 11.0	27272803
ECLASS 10.0.1	27272803
ECLASS 9.0	27272803
ECLASS 8.0	27272803
ECLASS 5.1	27272803
ETIM 9.0	EC001849
ETIM 8.0	EC001849
ETIM 7.0	EC001849
ETIM 6.0	EC001849
ETIM 5.0	EC001849
UNSPSC 12.1	41111960

Details: UC1000-30GM-IUR2-K-V15

Informative Literature: UC1000-30GM-IUR2-K-V15

Literature	Język	Typ pliku	Rozmiar pliku
Application Report - Rugged Collision Protection for Cleaning Robots	ENG	PDF	313 KB

Product Documentation: UC1000-30GM-IUR2-K-V15

Brief Instructions	Język	Typ pliku	Rozmiar pliku
Instruction leaflet / Beipackzettel	ALL	PDF	375 KB
Safety and Security Documentation
Instrukcja obsługi	POL	PDF	148 KB
Manuals
Manual ULTRA2001	ENG	PDF	1494 KB

Design / Simulation: UC1000-30GM-IUR2-K-V15

CAD	Język	Typ pliku	Rozmiar pliku
3-D model transducer / 3-D-Modell Wandler	ALL	STP	68 KB
CAD 3-D / CAD 3-D	ALL	STP	54 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	63 KB

Approvals: UC1000-30GM-IUR2-K-V15

Certificates	Nr. certyfikatu	Język	Typ pliku	Rozmiar pliku
Canada USA UL Ordinary Location	UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3	ALL	PDF	1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2366C	ALL	PDF	48 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5442	ALL	PDF	41 KB

Produkty powiązane: UC1000-30GM-IUR2-K-V15

Accessories

	BF 30 Mounting flange
	Mounting flange, 30 mmfa

	BF 5-30 Mounting flange
	Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

	V15-G-2M-PVC Female cordset
	Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa

	V15-W-2M-PUR Female cordset
	Female cordset single-ended M12 angled A-coded, 5-pin, PUR cable greyfa

	BF 30-F Mounting flange
	Plastic mounting adapter, 30 mmfa

	ULTRA3000 Service program
	Software for ultrasonic sensors, comfort linefa

	UVW90-M30 Ultrasonic -deflector
	Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstances, Focussing effectfa

	UVW90-K30 Ultrasonic -deflector
	Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa

	M30K-VE Mounting aid
	Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa

	UC-30GM-R2 Interface cable
	fa

Uwagi ogólne dotyczące informacji o produktach firmy Pepperl+Fuchs

Niezawodne zabezpieczenie zgodnie z kategorią 3 PL d

System czujników ultradźwiękowych USi-safety stanowi przełom w zastosowaniach związanych z bezpieczeństwem. Czujniki można stosować zarówno w trudnych warunkach, w zapylonym środowisku, jak i na zewnątrz.

Bezpłatne pliki do pobrania: Przewodniki technologiczne — Czujniki ultradźwiękowe

Firma Pepperl+Fuchs oferuje różne dokumenty do pobrania zawierające informacje na temat czujników ultradźwiękowych.

Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
phone +48 22 256 9770

Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.