Niedostępne do zakupu
Ultrasonic sensor UC10000-F260-IE8R2
- Large sensing range
- Adjustable Bracket
- Programmable by means of Interface (see accessories) and SONPROG
- Analog output 4 ... 20 mA
- 2 switch outputs
- Synchronization options
- Temperature compensation
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne UC10000-F260-IE8R2
| Opis produktu |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 800 ... 10000 mm | |
| Adjustment range | 800 ... 10000 mm | |
| Dead band | 0 ... 800 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 60 kHz | |
| Nominal ratings | ||
| Time delay before availability | 280 ms | |
| Limit data | ||
| Permissible cable length | max. 300 m | |
| Indicators/operating means | ||
| LED yellow | solid: switching state switch output flashing: misadjustment |
|
| Electrical specifications | ||
| Rated operating voltage | 24 V DC | |
| Operating voltage | 15 ... 30 V (including ripple) In supply voltage interval 15 ... 20 V sensitivity reduced to 20% ... 0% |
|
| Ripple | ≤ 10 % | |
| No-load supply current | ≤ 75 mA | |
| Input/Output | ||
| Input/output type | 1 synchronization connection, bidirectional | |
| 0 Level | ≤ 3 V | |
| 1 Level | 15 ... 30 V | |
| Input impedance | typ. 0.9 kΩ | |
| Number of sensors | max. 10 | |
| Switching output | ||
| Output type | 2 switch outputs PNP, NO | |
| Repeat accuracy | ± 15 mm | |
| Operating current | 300 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V | |
| Switch-on delay | 800 ms | |
| Analog output | ||
| Output type | 1 current output 4 ... 20 mA rising ramp | |
| Default setting | 800 ... 10000 mm | |
| Linearity error | ≤ 1.5 % | |
| Load resistor | ≤ 300 Ω | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Mechanical specifications | ||
| Connection type | screw terminals , PG 13.5 cable gland | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | UP 1225 SF/R8 | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 1800 g | |
| Dimensions | ||
| Depth | 112 mm | |
| Diameter | 160 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UC10000-F260-IE8R2
Informative Literature: UC10000-F260-IE8R2
| Literature | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Application Report - Fill Level Monitoring in Gravel Silos | ENG | 842 KB | |
| Application Report - Ultrasonic Technology - Collision Protection for Harbor Cranes | ENG | 1732 KB | |
| Application Report - Ultrasonic Technology - Wood Supply for Combined Heat and Power Plants | ENG | 969 KB |
Product Documentation: UC10000-F260-IE8R2
| Brief Instructions | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 566 KB |
Design / Simulation: UC10000-F260-IE8R2
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 229 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: UC10000-F260-IE8R2
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| Canada USA CSA Ordinary Location | 1007121 | ALL | 198 KB | |
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
Produkty powiązane: UC10000-F260-IE8R2
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
System czujników ultradźwiękowych USi-safety stanowi przełom w zastosowaniach związanych z bezpieczeństwem. Czujniki można stosować zarówno w trudnych warunkach, w zapylonym środowisku, jak i na zewnątrz.
Firma Pepperl+Fuchs oferuje różne dokumenty do pobrania zawierające informacje na temat czujników ultradźwiękowych.
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.