Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne
UB400-F42S-UK-V95
Opis produktu |
Single head system |
General specifications |
Sensing range | 40 ... 400 mm |
Adjustment range | 50 ... 400 mm |
Dead band | 0 ... 40 mm |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 390 kHz |
Response delay | approx. 50 ms |
Indicators/operating means |
LED green | solid green: Power on |
LED yellow | solid: switching state switch output flashing: program function |
LED red | normal operation: "fault" program function: no object detected |
Electrical specifications |
Fusing | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
Operating voltage | 22 ... 253 V AC/DC |
No-load supply current | ≤ 60 mA |
Time delay before availability | ≤ 800 ms |
Output |
Output type | 1 relay output |
Rated operating current | 3 A |
Repeat accuracy | ≤ 0.5 % of switching point |
Switching frequency | ≤ 8 Hz |
Range hysteresis | 1 % of the set operating distance |
Temperature influence | ± 1 % of full-scale value |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Degree of protection | IP65 |
Connection | 5-pin V95 connector (7/8"-16 UN 2A) |
Material | |
| Housing | PBT |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
Mass | 260 g |
Dimensions | |
| Height | 80 mm |
| Width | 34 mm |
| Length | 80 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Details:
UB400-F42S-UK-V95
Product Documentation:
UB400-F42S-UK-V95
Design / Simulation:
UB400-F42S-UK-V95
Approvals:
UB400-F42S-UK-V95
Produkty powiązane:
UB400-F42S-UK-V95
Accessories |
|
|
|
Mounting aid for FP and F42 sensors, Suitable for series F42 and FPfa |
|
|
|
|
Female connector, 7/8" - 16 UN, 5-pin, field attachablefa |
|
|
|
|
Female cordset, 7/8", 5-pin, PVC cablefa |
|
|
|
|
Female cordset, field attachablefa |
|
|
|
|
Female cordset, 7/8", 5-pin, PVC cablefa |
|
|
|
|
Mounting brackets for sensorsfa |
|