Niedostępne do zakupu
Surge Protection Barrier M-LB-2.150.T3.D
- Surge protection for 2 supply lines
- Type 3 acc. to EN 61643-11
- Nominal voltage 120 V AC
- Pre-wired unit
- Operating state and fault indication of every protected line
- Fault indication output
- DIN rail mountable
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne M-LB-2.150.T3.D
| General specifications | ||
|---|---|---|
| Device type | type 3 acc. to EN 61643-11:2013 class III acc. to IEC 61643-1:2011 |
|
| Number of protected supply lines | 2 | |
| Suitable components | protection module M-LB-2.150.T3.M | |
| Electrical specifications | ||
| Nominal voltage | 120 V AC, 50 ... 60 Hz | |
| Maximum continuous operating voltage | 150 V AC, 50 ... 60 Hz 150 V DC |
|
| Nominal load current | 25 A | |
| Nominal discharge current (8/20 µs) | 2 kA | |
| Max. surge current (8/20 µs) | 4 kA | |
| Voltage protection level | max. 640 V (L-N) max. 800 V (L/N-PE) |
|
| Reaction time | max. 25 ns (L-N) max. 100 ns (L/N-PE) |
|
| Short-circuit-proof | 6 kA eff at max. mains-side overcurrent protection | |
| Overcurrent protection | max. 25 A gL/gG (B 25 A) , mains-side | |
| Fault indication output | ||
| Connection | terminals 11, 12, 14 | |
| Output | volt-free change-over contact | |
| Switch power | AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A |
|
| Indicators/settings | ||
| Display elements | status display operating state (green) fault indication (red) |
|
| Directive conformity | ||
| Low voltage | ||
| Directive 2014/35/EU | EN 61643-11:2012 | |
| Conformity | ||
| Degree of protection | IEC 60529:2013 | |
| Shock resistance | EN 60068-2:2010 | |
| Vibration resistance | EN 60068-2:2010 | |
| Operating conditions | ||
| Installation conditions | ||
| Mounting location | indoor | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Relative humidity | 5 ... 95 % | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Core cross section | - min. 0.5 mm2 solid/flexible - max. 4 mm2 stranded/2.5 mm2 flexible |
|
| Material | ||
| Housing | thermoplastic, color grey , UL 94 V-0 | |
| Mass | approx. 120 g | |
| Dimensions | 18 x 90 x 72 mm (0.7 x 3.6 x 2.8 inch) (W x H x D) , 1 TE acc. to DIN 43880 | |
| Height | 90 mm | |
| Width | 18 mm | |
| Depth | 72 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27171202 |
| ECLASS 12.0 | 27171202 |
| ECLASS 11.0 | 27130805 |
| ECLASS 10.0.1 | 27130805 |
| ECLASS 9.0 | 27130805 |
| ECLASS 8.0 | 27130805 |
| ECLASS 5.1 | 27130801 |
| ETIM 9.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 6.0 | EC000941 |
| ETIM 5.0 | EC000941 |
| UNSPSC 12.1 | 39121610 |
Details: M-LB-2.150.T3.D
Function
This device is a modular surge protection barrier (type 3 acc. to EN 61643-11) with error message output (floating changeover contact).
The complete device consists of a base module and plug-in protection modules and is ready for installation.
The base part offers multifunctional terminals for connection of conductors and busbars.
Every protection module is locked in the base module and can be changed without tools via release buttons.
Product Documentation: M-LB-2.150.T3.D
| Brief Instructions | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 528 KB |
Design / Simulation: M-LB-2.150.T3.D
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1226 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: M-LB-2.150.T3.D
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| China CNEX CCC Ex Certificate | 2023312304001733 (Germany) | ALL | 1622 KB | |
| Europe DEKRA Surge Protective Device | KEMA 2172593.02 | ALL | 234 KB | |
| Europe TUV Rheinland ATEX Category 3 G ATEX Certificate | TÜV 22 ATEX 8932 X | ALL | 151 KB | |
| USA UL Surge Protective Device UL | E346845 UL (VZCA2) | ALL | 235 KB | |
| Worldwide TUV Rheinland IECEx Certificate of Conformity | IECEx TUR 22.0082X | ALL | LINK | 630 KB |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2133A | ALL | 50 KB | |
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.