| Accessory of |
|
|
|
| AS-Interface advanced repeater with terminatorfa |
|
|
|
|
| KE switch cabinet module, 4 inputs and 4 outputsfa |
|
|
|
|
|
KE switch cabinet module
4 inputs (PNP)fa |
|
|
|
|
KE1-Safety module for the control cabinet
2 safety-related inputs and
2 conventional electronic outputsfa |
|
|
|
|
KE1-Safety module for the control cabinet
2 safety-related inputs and
2 conventional electronic outputsfa |
|
|
|
|
| KE3 control cabinet module, 4 inputs, 1 control-safe relay outputfa |
|
|
|
|
| 2-channel, 115/230 V AC supply, 3-wire PNP/NPN sensor or push-pull input, Relay contact output, DIP switch selectable functions, Minimum/maximum control, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Interval relay, Min./max. control, Safety Integrity Level (SIL): SIL 2, Rated voltage: 90 ... 253 V AC , 45 ... 65 Hz, Field device: 3-wire sensor, Field device [2]: Push-pull (4 in 1) output, Type: 2 x relay (change-over contact)pa |
|
|
|
|
KE1 switch cabinet module
4 inputs and 2 outputsfa |
|
|
|
|
| Safe contact expansion, 2 channels, 8 contact setsfa |
|
|
|
|
| KE switch cabinet module, 4 inputs (PNP) and 3 relay outputsfa |
|
|
|
|
| AS-Interface power extenderfa |
|
|
|
|
| Bracket for VAA-3E-HH30-J-S-V1fa |
|
|
|
|
| Safety monitor, three 2-channel secure inputs, two secure outputsfa |
|
|
|
|
| Safety Monitor, 8 decentralized output circuitsfa |
|
|
|
|
|
| Safety Monitor, 8 decentralized output circuitsfa |
|
|
|
|
KE4 switch cabinet module for rotary encoder
Adapter for 2 rotary encoder to rotation speed monitor and control panelfa |
|
|
|
|
Cabinet module
4 inputs and 4 outputsfa |
|
|
|
|
|
KE switch cabinet module
4 inputs and 3 outputsfa |
|
|
|
|
KE control cabinet module
2 analog inputsfa |
|
|
|
|
|
| KE switch cabinet module, 4 inputs (PNP) and 4 relay outputsfa |
|
|
|
|
|
| KE switch cabinet module, 4 inputs (PNP) and 4 relay outputsfa |
|
|
|
|
| 2-channel signal conditioner, Universal usage at different power supplies, Dry contact or NAMUR inputs, Input frequency 1 mHz ... 1 kHz, Current output 0/4 mA ... 20 mA, Relay contact and transistor output, Start-up override, Configurable by PACTware or keypad, Line fault detection (LFD), Rated voltage: 20 ... 90 V DC / 48 ... 253 V AC 50 ... 60 Hz, Input I, II: 2-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact, Output I, II: signal, relay, Output V: analogpa |
|
|
|
|
|
| KE switch cabinet module, 4 inputs and 4 outputsfa |
|
|
|
|
| KE1 switch cabinet module, 4 inputs and 4 outputsfa |
|
|
|
|
| KE1 switch cabinet module, 4 inputsfa |
|
|
|
|
|
| KE1 switch cabinet module, 4 inputs and 4 outputsfa |
|
|
|
|
Control cabinet module
Data couplerfa |
|
|
|
|
| KE1 safety module for the control cabinet, 2 Safety-related inputsfa |
|
|
|
|
|
| KE3 switch cabinet module, 1 safety-related electronic output, 4 standard inputs, 2 standard outputsfa |
|
|
|
|
KE4 control cabinet module
2 inputs for incremental rotary encodersfa |
|
|
|
|
KE4 control cabinet module for rotary encoders
2 safe inputs und 2 safe outputsfa |
|
|
|
|
KE4 switch cabinet module
8 safety-related electronic outputs, each switchable with a standard output, 8 standard inputsfa |
|
|
|
|
|
| KE switch cabinet module, 4 inputs and 3 outputsfa |
|
| Matching System Components |
|
|
|
| 1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminals, Number of channels: 1-channel, Restart inhibit, Start-up override, Signal type: Digital Input, Rated voltage: 16.8 ... 31.2 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Field device [3]: 2-wire DC sensor, Field device [4]: SN sensorpa |
|
+48 22 256 9770