Principais benefícios
Mostrar mais
Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.
| Detection type | photoelectric sampling | |
| Linearity error | ± 0.025 ° | |
| Pulse count | max. 5000 |
| MTTFd | 435 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % |
| Operating voltage | UB | 4.75 ... 30 V DC |
| No-load supply current | I0 | max. 50 mA |
| Output type | push-pull or RS422 (universal output driver, output level depending on input voltage) | |||||||
| Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected | |||||||
| Output frequency | max. 400 kHz | |||||||
| Rise time | 300 ns | |||||||
| Phase position A to B | ||||||||
| ||||||||
| Duty cycle | 1/2 ± 10 % | |||||||
| Connector | M12 connector, 8-pin M12 connector, 5 pin M23 connector, 12-pin , clockwise rotation M23 connector, 12-pin , counter clockwise rotation | |
| Cable | ∅6 mm, 4 x 2 x 0.14 mm2 | |
| Terminal compartment | Cable duct for cable diameter ∅4.0 mm ... 9.5 mm |
| Degree of protection | DIN EN 60529, IP66, IP67 | ||||
| Climatic testing | DIN EN 60068-2-78 , no moisture condensation | ||||
| |||||
| Emitted interference | EN IEC 61000-6-4:2019 | ||||
| Noise immunity | EN IEC 61000-6-2:2019 | ||||
| Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms | ||||
| Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz | ||||
| UL approval | E223176 , cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure , if UL marking is marked on the product. For use in NFPA 79 Applications only. adapters providing field wiring on request | ||||
| |||||
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) , cable, fixed installation -5 ... 85 °C (23 ... 185 °F) , movable cable | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Material | |||||||||||
| |||||||||||
| Mass | < 1100 g without cable | ||||||||||
| Rotational speed | max. 3000 min -1 | ||||||||||
| Starting torque | ≤ 0.25 Nm | ||||||||||
| Shaft insulation | max. 2.5 kV (for dielectric strength version) | ||||||||||
| Shaft load | |||||||||||
| |||||||||||
| Dimensions | |||||||||||
| |||||||||||
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
| Categories | Description | Status |
|---|---|---|
| Functional | These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login). | |
| Analytics | We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it. | |
| Marketing | These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content. |